Sewing a Collar on a Sweater
You can sew a collar onto a sweater by matching the collar and neckline at their centers and shoulders, basting them together without stretching either edge, then stitching and finishing the inside collar edge neatly. The best method depends on whether you are adding a fabric collar to a sweatshirt-style knit, sewing a separate knitted collar onto a hand-knit sweater, or knitting the collar directly from live neckline stitches. Start by deciding which construction matches your garment.
What Sewing a Collar Onto a Sweater Involves
A collar must fit the sweater’s neckline along the seamline, not merely match the raw-cut edge. Seam allowances can make two pieces look like different lengths even when they will sew together correctly.
The collar also needs to retain its shape while the sweater neckline keeps enough stretch to go over your head. A woven collar usually benefits from interfacing; a hand-knit collar needs a flexible yarn seam or live-stitch attachment.
A collar stays smooth when its shape is controlled before sewing and the sweater neckline is not pulled out of shape during attachment.
Mark the center back, both shoulder positions, and the front ends on the collar and neckline before you sew. These reference points divide a potentially awkward curve into smaller sections that are easy to match.
How to Sew a Fabric Collar Onto a Sweater
Choose the construction that matches the sweater before cutting or stitching.
| Sweater or Collar Type | Best Attachment Method | Main Concern |
|---|---|---|
| Sweatshirt or cut-and-sew knit sweater | Sew a fabric collar into the neckline seam | Preserve neckline stretch |
| Sweater with a separate fabric Peter Pan or pointed collar | Build the collar first, then sew it to the neckline | Keep the two collar halves symmetrical |
| Hand-knit sweater with a bound-off neckline | Hand-sew a finished knitted collar with yarn | Avoid a rigid seam |
| Hand-knit sweater with live neckline stitches | Pick up stitches and knit outward | Use the correct pickup rate |
| Bulky recycled sweater collar | Cut a ribbed panel, form a loop, and sew it to the neckline | Distribute bulk evenly |
Step 1: Cut, Interface, and Mark the Collar
- Cut the collar pieces from your chosen fabric, following the grain direction and seam allowance specified by the pattern.
- If the collar is interfaced, apply interfacing to the wrong side of the collar piece that will be the upper collar. For a rounded detachable collar, trim the interfacing about 1/4 inch smaller than the collar piece so it stays out of the seam allowance; confirm the exact inset in your collar pattern’s interfacing-cutting instructions.
- Fold the collar fabric and interfacing in half to find their centers. Clip the center marks about 1/8 inch into the seam allowance, not into the visible part of the collar. Make a matching center mark on the sweater neckline.
- Transfer shoulder notches, front-edge marks, and any placement dots to the wrong side of the fabric. Use tailor’s chalk, a removable marker, or small clips in the seam allowance.
Step 2: Sew the Collar Pieces Directionally
- Place the two collar pieces right sides together, aligning their center marks, shoulder marks, and outer edges.
- Pin or clip the layers along the curved outer edge. Align both layers smoothly along the curved outer edge.
- Sew the collar in matched directions rather than continuously around the curve. Start at the center opening and stitch toward one collar edge. Return to the center opening and stitch toward the opposite edge.
- For a curved outer edge with a center-back mark, sew from center back toward one collar end, then turn the work and sew from center back toward the other end. This directional sewing helps keep the fabric grain from distortion.
Step 3: Clip, Turn, and Press the Collar
- Trim bulky seam allowances only if your pattern calls for it. Keep enough seam allowance to hold the curve securely.
- On outward curves, cut small triangular notches every 1/2 inch or so after stitching and before turning the collar right side out. Stop short of the stitching line.
- I use small embroidery scissors to cut curve notches because their pointed tips help me stop short of the stitching.
- Turn the collar right side out, gently shape the points or curves with a point turner, and press the seam carefully.
- For a traditional folded collar edge, baste close to the fold, about 1/4 inch from it. After basting, finish the seam allowance at either 1/4 inch or 5/8 inch.
Step 4: Match the Collar to the Sweater Neckline
- Turn the sweater wrong side out. Keep the collar right side out.
- Place the collar against the sweater neckline with right sides together. Match center back first, then shoulder marks, then the front ends.
- Work outward from the matched points, adding pins or clips as needed. If the collar is slightly longer than the neckline seamline, distribute the extra length evenly rather than placing it all near one shoulder.
- Hand-baste the collar to the neckline before machine sewing. This is especially useful with a sweatshirt knit, because basting lets you confirm that the center back and shoulder marks still align before machine sewing.
- Test your machine stitch on a scrap of the sweater fabric. Use the stretch-capable stitch recommended by the garment pattern for a knit sweater, and do not pull the sweater or collar while it feeds through the machine.
Step 5: Sew the Collar Into the Neckline
- Stitch along the neckline seam allowance, beginning at center back and working toward one front edge.
- Return to center back and sew toward the other front edge. Working in two directions helps prevent the neckline from becoming longer on one side.
- Remove the basting stitches and inspect the right side before trimming anything. The collar should meet the neckline evenly, with the shoulder points in the same position on both sides.
- Press the neckline seam as the fabric allows. Pressing over a tailor’s ham or rolled towel helps support the curve without flattening the collar.
Step 6: Finish the Inside Collar Edge
- Turn the inner collar seam allowance under so it covers the neckline seam.
- Hand-slipstitch the folded edge in place, or machine edgestitch it 1/8 inch from the folded edge or seamline. Keep the collar flat as you stitch for an even finish.
- Press the finished collar from the inside and outside, using a pressing cloth if the fabric is delicate or prone to shine.
- Try the sweater on. The neckline should lie comfortably against the body, and the collar should sit evenly when folded or worn flat.
Sewing a Knitted Collar Onto a Hand-Knit Sweater
A separate knitted collar can be sewn onto a sweater after the shoulder seams are joined and the neckline is stable. Use matching yarn and a blunt tapestry needle so the seam remains flexible.
Prepare the Knitted Collar
If the collar is made from knit fabric and has an inner and upper collar layer, align the marked shoulder notches before stitching the layers together. Clip the inner or upper collar at each marked shoulder notch by 1 cm (3/8 inch).
After stitching the two collar pieces together, trim the seam allowance when the knit collar pattern allows it.
Sew the Collar to the Neckline
Match center back and shoulders, then distribute the rest of the collar around the neckline. Use a flexible hand stitch with matching yarn, catching enough of the sweater edge to secure the collar without making a tight ridge.
For a collar with live knitted stitches, work each backstitch 2 stitches over as you join it to the neckline. Continue around the neckline, keeping the collar edge aligned with the sweater’s marked points. Weave in yarn ends on the inside, then lightly block the neckline and collar into shape.
Knitting a Collar Directly From the Sweater Neckline
Knitting from the neckline eliminates a sewn collar seam and works well for polo-style collars, shawl collars, and folded ribbed collars.
Join the sweater shoulders first. Count the neckline stitches that will carry the collar, excluding button-band stitches if the collar will stop beside the bands rather than overlap them.
Pick up 1 stitch for 1 stitch along the sweater neckline. This creates a collar edge that matches the neckline stitch count without forcing the fabric to gather or flare.
Work the collar shaping, increases, and length called for by the sweater pattern. Bind off with enough flexibility for the collar to fold or lie open, weave in the ends, and block the sweater so the collar edge settles into its intended shape.
Making a Chunky Collar From a Recycled Sweater
A recycled sweater torso can become a warm ribbed collar for another knit garment, especially when the original sweater has a substantial ribbed edge.
Choose a recycled sweater torso measuring at least 30 inches in circumference, or 15 inches across when measured flat. Confirm the final collar length and depth required by your garment pattern before cutting.
- Cut a panel from the sweater torso and trim it to 8 inches deep by 28 inches long, or to the length needed for the garment neckline.
- Fold the panel so the right sides face each other and align the short ends.
- Sew the short ends using a 5/8-inch-wide seam allowance. Allow for the recycled knit’s bulk when sewing the short ends.
- Turn the loop right side out and fold it lengthwise so the raw edges align and the finished edge forms the top of the collar.
- Match the loop’s seam to center back, then divide both the collar and neckline into matching sections. Pin or baste the raw collar edge to the neckline.
- Sew the collar to the garment with a stretch-capable seam, then finish the inside neckline edge with a facing, binding, or hand stitching appropriate to the garment.
Fixing Common Collar Problems
| Problem | Likely Cause | Least Disruptive Fix |
|---|---|---|
| Collar ripples along the neckline | The sweater neckline stretched during sewing | Remove stitching only from the rippled area, let the neckline relax, then rebaste without pulling it |
| One collar side sits higher | Center or shoulder marks were not matched | Compare the collar points to center back and shoulder seams, then resew the uneven side |
| Curved edge puckers after turning | The seam allowance cannot spread around the curve | Add careful notches between existing clips without cutting the stitch line |
| Neckline feels too tight | The collar seam is shorter than the neckline or the seam has no stretch | Unpick the neckline seam and compare the collar and neckline seamlines before resewing |
| Collar flips upward | The collar has not been pressed into its roll line or the inner edge is loose | Press the collar in its intended direction and secure the inner collar edge evenly |
| Collar is bulky at center back | Several seam allowances meet in one spot | Grade or stagger the seam allowances where the pattern permits, then press over a curved surface |
Checking the Finished Collar and Preventing Problems
Before calling the sweater finished, check these points:
- The collar ends are even at the front.
- Center back on the collar aligns with center back on the sweater.
- Shoulder marks sit at the shoulders rather than drifting toward the front or back.
- The neckline remains comfortable to pull over the head when the garment is designed as a pullover.
- The collar lies smoothly without diagonal pulls, bubbles, or tight spots.
- The inside neckline is covered neatly and has no exposed raw edges unless the knit fabric is intentionally left unfinished.
For future collars, save the pattern piece and note any adjustments you made to the neckline length, collar height, or interfacing. A quick fabric test collar is especially worthwhile before cutting into a hand-knit sweater or a favorite sweatshirt.
Frequently Asked Questions
How Do I Sew a Collar on a Sweatshirt?
Sew a sweatshirt collar with a stretch-capable seam and avoid pulling the knit neckline while you sew. Mark center back and shoulder positions, baste the collar in place, then stitch from center back toward each front edge. Finish the inside edge so it covers the neckline seam cleanly.
Should I Sew on a Knitted Collar or Pick Up Stitches?
Sew on a knitted collar when the collar is already made as a separate piece or when you want a clearly defined seam. Pick up stitches when you want the collar to grow directly from the neckline; use 1 stitch for 1 stitch along the neckline for a balanced pickup edge. Both methods can produce a professional finish when the collar and neckline are matched at center back and shoulders.
How Do I Keep a Collar From Flipping Up?
Press the collar in the direction it is meant to sit, and make sure the inner collar edge is secured evenly around the neckline. A collar can also flip when one side has stretched or when its front ends are uneven. If it still will not sit correctly, unpick the affected section and resew it without pulling either layer.
How Do I Sew on a Rounded Detachable Collar?
Build and turn the collar before attaching or finishing its neckline edge, and sew its curves directionally from the center toward each side. For a first attempt, make the collar in stable cotton and practice the curved seams on scraps before cutting the final fabric; WeAllSew’s detachable rounded-collar tutorial provides a useful pattern-based example of this construction.
