Knit Tapestry: How to Make a Knitted Wall Hanging
A knit tapestry is a decorative knitted panel, usually displayed as a wall hanging, made with textured stitches, colorwork, or embroidered designs. A striped garter-stitch panel is a good first project because it needs only basic knitting skills and naturally resists curling. This guide covers choosing yarn, knitting and finishing the panel, adding tassels, and supporting it so it hangs evenly.
What a Knit Tapestry Is
Traditional tapestry is woven: colored weft threads pass across lengthwise warp threads to form a picture or pattern. Knitting makes fabric from interlocking loops instead. You can create a similar decorative effect with knitting needles, but the finished fabric will have more stretch and needs support when displayed.
The word tapestry also appears in needlepoint, where stitches cover a canvas. Neither needlepoint nor tapestry weaving uses the same construction as a knitted wall hanging.
Choose the project type before buying yarn: a wall hanging and a garment named “Tapestry” need different materials and planning.
For example, Tapestry Knit by Veronica Franklin and Caroline Cardew is a cardigan, while Cheryl Faust’s Tapestry is a top-down colorwork pullover. A pattern’s name alone does not tell you whether it makes wall art.
For a hanging, prioritize:
- A stable surface: Garter stitch and seed stitch resist curling better than plain stockinette.
- Manageable weight: A large or heavily fringed panel can stretch under its own weight.
- Clear texture or color: Smooth yarn makes stitches and small motifs easier to distinguish.
- A supported top edge: Distributing the weight across a rod helps prevent sagging between attachment points.
How to Knit a Wall Tapestry
The method below makes a simple striped panel with an optional elongated-stitch band. It is not a reproduction of the full Laomai pattern; that Furls design provides concrete examples of materials and techniques. Changing its stitch sequence will also change the finished size and yarn use.
Choose yarn according to the surface and weight you want.
| Yarn Choice | Best Suited To | What to Check Before Committing |
|---|---|---|
| Smooth wool or a wool blend | Defined texture and a resilient fabric | Whether the washed swatch holds its shape |
| Cotton or linen yarn | Crisp stitches and a less springy surface | Whether the fabric feels heavy or stretches when suspended |
| Compatible leftover knitting yarns | Stripes and budget-friendly color combinations | Similar thickness, compatible care requirements, and enough yarn to finish each band |
Step 1: Choose the Size and Buy Yarn
- Measure the intended display space. Allow room for the panel, its hanging cord, and any fringe. As a size reference, Furls’ Laomai Knit Tapestry has finished-size details of 24 inches long by 15 inches wide. Those measurements belong to that design, not to knitted tapestries generally.
- Buy yarn by yardage as well as weight. For Laomai, Furls specifies one skein each of White and Charcoal in Furls Whims Merino Worsted; each skein contains 94 yards (86 m) and weighs 3.5 ounces (100 g). These are the quantities in that pattern’s supplies list. A substitute skein with the same weight may contain a different length of yarn.
- Decide between a coordinated project and a scrap-yarn panel. A planned color palette makes it easier to repeat balanced stripes. Leftovers work well for a free-form hanging, provided their thickness and care needs are compatible. Reserve some yarn for binding off, attaching the panel, and any tassels before using the remainder in the body.
There is no universal yarn quantity for a knit tapestry. Width, length, stitch pattern, yarn thickness, and decoration all affect consumption.
Step 2: Swatch and Gather Your Tools
- Select needles that suit the yarn and fabric. For the Laomai wall hanging, Furls specifies US size 9 (5.5 mm) circular knitting needles in its supplies list. Circular needles can hold a wide panel comfortably even when you work back and forth rather than in the round.
- Knit a swatch in the intended stitches. Include both colors and any elongated stitches you plan to use. Wash and dry it using the care method appropriate to the yarn. Check whether the fabric is firm enough to hang without becoming excessively loose.
- Gather finishing supplies. You will need scissors, a measuring tape, a blunt tapestry needle large enough for the yarn, a towel or blocking surface, and a rod or smooth branch. A tapestry needle is for weaving in ends and sewing attachments; it does not replace knitting needles.
Casting on creates the starting edge, knitting builds the panel, and binding off secures the final row. The Utah State University Extension Knitting Handbook covers these basic skills. Practice them before starting the full-width panel.
Step 3: Cast On and Establish Neat Edges
- Cast on without joining in the round. Furls’ Laomai begins with Color A, Charcoal, and 61 stitches. You can use that starting count for a free-form practice panel with the specified yarn and needles, but the stated dimensions are for the finished pattern after blocking.
- Work the slipped-stitch edge. For Row 1 of Laomai, Furls uses this treatment: hold the yarn in front, slip the first stitch as if to purl, move the yarn to the back between the needle tips, and knit to the end. The slipped stitch is included in the 61-stitch total; it is not an extra stitch.
- Turn and continue the plain panel. Repeat that slipped-edge garter row for your first band. Garter stitch is formed by knitting on every row when working flat. Keep the edge stitch relaxed rather than pulling it tight.
Moving the yarn between the needle tips matters. Taking it over the needle can accidentally create a yarn-over and increase the stitch count.
Step 4: Add Stripes and an Optional Drop-Stitch Band
- Change colors at a side edge. Begin a new plain row with the next yarn, leaving a tail that can be threaded through a tapestry needle and woven into the fabric. Knit the row, then gently adjust the first stitches so the join is neither loose nor puckered.
- Build the panel with garter-stitch bands. Continue back and forth, changing colors when you want a new stripe. For narrow stripes, an unused yarn can travel loosely up the side; for widely separated color changes, cutting and rejoining avoids a long exposed strand.
- Add an elongated-stitch band if desired. In the drop-stitch section of Furls’ Laomai pattern, the setup is labeled Row 5: knit each stitch while wrapping the yarn twice around the needle. The extra wrap makes the needle appear to hold more stitches. It is intentional, not an accidental increase.
- Release the extra wraps on the following row. Knit each actual stitch while letting its extra wrap slide off the needle. The released yarn forms an elongated stitch. Do not drop the stitch itself and allow it to unravel down the fabric.
- Return to plain garter stitch. Continue with solid bands, adding another elongated band only where you want that texture. End with a firm garter-stitch band rather than an open drop-stitch row, and stop while enough yarn remains for binding off and finishing.
The extra wrap supplies the length for the elongated stitch. Pulling hard on the fabric is not what creates it; excessive tugging can distort the neighboring stitches.
Step 5: Bind Off and Wet-Finish the Panel
- Bind off at an even tension. Knit two stitches, lift the older stitch over the newer one and off the needle, then continue knitting a stitch and passing the previous stitch over it. Avoid making this edge tighter than the body. Cut the yarn and draw the tail through the final loop.
- Weave in the ends. Use a tapestry needle to follow the backs of stitches without pulling the fabric inward. Work color-change tails into matching areas where possible, especially if the hanging contains open bands.
- Wet-finish according to the fiber. For Laomai made with its specified yarn, Furls uses about 10 minutes in cool water with wool wash. Its finishing instructions also permit a drop of gentle dish detergent or hair conditioner, although a wool wash intended for the fiber is the more straightforward choice. A substituted yarn may need different care.
- Remove water without wringing. Support the wet panel as you lift it, gently press out water, and roll it in a towel. Lay it flat, straighten the sides, and ease the elongated stitches into an even arrangement.
- Let it dry completely while supported. Do not hang a wet panel from its upper edge: the added water weight can stretch it. Trim protruding yarn ends after checking that their woven sections remain secure.
Blocking should settle the fabric, not force it into a size it cannot comfortably hold.
Step 6: Make and Attach Optional Tassels
- Prepare the bundle. For Laomai’s tassels, Furls uses stiff cardstock or a cardboard toilet-paper roll cut lengthwise and wraps the yarn around it about 30 times. The width of the form controls tassel length; the number of wraps controls fullness.
- Tie the top securely. Furls leaves the tying tails about 6 inches long for attaching each Laomai tassel. Tie around the gathered loops at one end, then slide the bundle off its form.
- Finish the tassel. Wrap another piece of yarn around the bundle below the top tie to form a head. Secure that wrap, cut the loops at the opposite end, and trim the fringe evenly.
- Attach the tassels to the dry panel. Pass the long tying tails through a firm section of the lower edge, secure them on the back, and weave in the ends. Space the tassels while the panel lies flat so their weight is balanced.
Tassels are optional. Leaving them off gives a lighter hanging and keeps attention on the knitted surface.
Step 7: Mount the Tapestry on a Rod
- Choose a smooth support wider than the panel. For Laomai, the Furls example uses a dowel or thin branch approximately 25 inches long. That is the example branch length in the supplies notes, not a requirement for every hanging; your support should suit the panel width and attachment method.
- Attach the upper edge evenly. Thread a tapestry needle with sturdy, compatible yarn. Make attachment loops around the rod and through the firm upper border, distributing them across the width. Keep the loops consistent so one area does not carry most of the weight.
- Secure the sewing yarn. Finish on the back, fasten the end, and weave the tail through the border without bunching it. Check that the fabric is not stretched sideways along the rod.
- Add the hanging cord and display the piece. Tie the cord securely near both ends of the rod, then use wall hardware suitable for the combined weight. Adjust the cord and panel until the rod is level and the fabric hangs freely.
Adding Pictures and Lettering to a Knit Tapestry
A striped hanging does not need a chart. A picture, word, or repeating motif benefits from choosing the colorwork technique before designing the image.
Intarsia for Large Color Shapes
Intarsia uses separate yarn supplies for distinct blocks of color. It suits broad shapes, landscapes, and large letters because unused yarn does not have to travel across the entire back.
Each isolated color area needs its own yarn supply. A design with many scattered dots can therefore become cumbersome, even if it looks simple on paper.
Stranded Colorwork for Repeating Motifs
Stranded knitting carries unused yarn across the back as floats. It suits repeating motifs where colors recur regularly across a row.
The main challenge is tension: tight floats pull the fabric inward. For wall art, the hidden back is less of a visual concern, but puckering still affects the visible picture and how evenly the panel hangs.
Duplicate Stitch for Small Details
Duplicate stitch follows the V-shaped stitches of stockinette with a second yarn. It is useful for adding a name, small symbol, or accent after the panel is knitted.
It adds thickness rather than replacing the background yarn. A densely covered area can feel stiff, so it is better suited to selected details than to covering an entire large panel.
For this approach, plan a stockinette center with a noncurling border. Garter stitch does not provide the same clear grid of V-shaped stitches.
How to Check and Care for Your Knit Tapestry
Check the hanging after mounting, when its own weight reveals problems that may not be obvious on a table.
| What You Notice | Likely Cause | What Needs Attention |
|---|---|---|
| Side edges roll inward | Stockinette’s natural curl | A structural border or backing; blocking alone rarely removes persistent curl |
| The panel narrows unexpectedly | Lost stitches or tighter tension | Stitch count and row-by-row consistency |
| Colorwork looks puckered | Floats are too tight | More room in the carried yarn |
| Elongated bands look uneven | Uneven wrapping or unfinished blocking | Even distribution of the released yarn |
| The top edge forms scallops | Attachment points are too far apart | More evenly distributed support across the rod |
| The lower edge pulls downward | Heavy yarn, loose fabric, or substantial fringe | Overall weight and the amount of decoration |
A finished hanging should have:
- Secure cast-on and bound-off edges.
- No unintended loose loops or unraveling stitches.
- Ends woven in without visible puckering.
- A fully dry panel with reasonably straight sides.
- Attachment loops that share the weight across the upper edge.
- Tassels that do not distort the lower border.
Keep the piece away from prolonged direct sunlight to reduce fading. Remove surface dust gently without dragging a brush through open stitches or fringe. If washing is necessary, remove the rod, support the wet fabric, and dry it flat before remounting.
Once the panel hangs evenly, choose its permanent position and make the final cord adjustment there.
Frequently Asked Questions
Can You Knit With Tapestry Yarn?
Yes, you can knit with tapestry yarn if it forms a suitable fabric, but needlepoint yarn is not automatically interchangeable with knitting yarn. It may come in short lengths and may lack a recommended knitting gauge or enough yardage for a large panel. Knit and wash a swatch to assess stiffness, shedding, color bleeding, and whether the yarn supply is practical for the project.
Can You Use a Cross-Stitch Chart for Knitting?
Yes, but a square cross-stitch chart may look vertically compressed when knitted in stockinette because knitted stitches are generally wider than they are tall. Use the stitch and row proportions of a blocked swatch to redraw the design on knitting graph paper. Stockinette-based intarsia, stranded colorwork, and duplicate stitch are more direct matches for a colored-square chart than garter stitch.
What Can You Use a Knitted Tapestry For Besides Wall Art?
A knitted tapestry panel can become a decorative banner, a cushion front, or an inset in a fabric-backed textile project. The construction needs to suit the use: open drop-stitch fabric and dangling tassels are better for display than for surfaces that receive frequent handling. For a cushion, a stable backing and securely enclosed edges help the knitted panel keep its shape.
