How to Knit a Raglan Cardigan

A top-down raglan cardigan is one of the most approachable sweater projects because you knit it flat, try it on as you go, and separate the sleeves from the body without sewing major seams. The defining feature is the set of diagonal raglan lines that run from the neckline toward the underarms. This guide walks you through choosing a pattern, getting the fit right, knitting the yoke, and finishing a cardigan you will want to wear.

Understanding Raglan Cardigan Construction

A raglan cardigan has shaping lines that angle from the neck to the underarm. Instead of a separately shaped shoulder seam, the yoke grows through increases placed along those raglan lines.

A pullover raglan is often worked in the round after the neckline. A cardigan has an opening down the front, so a top-down cardigan is usually worked flat in rows: right-side rows face you, then you turn and work wrong-side rows.

Most top-down raglan cardigans have five sections at the cast-on edge: right front, sleeve, back, sleeve, and left front.

  • Left front
  • Left sleeve
  • Back
  • Right sleeve

Markers separate those sections and identify where the raglan shaping happens. As you increase, the fronts, sleeves, and back all widen until the yoke reaches the underarms. Then you place the sleeve stitches on holders or waste yarn and continue the body.

The construction gives you an important advantage: you can check the shoulder width, armhole depth, and intended ease before completing the body.

Choose a Raglan Cardigan Pattern, Yarn, and Fit

Choose a pattern whose construction and shaping match the cardigan you want to make. A top-down pattern is the easiest choice if you want to assess fit while knitting; a bottom-up pattern can suit knitters who prefer working the body and sleeves separately before joining them.

Use this quick comparison before committing to a pattern.

Construction How It Is Worked Best For Main Watch-Out
Top-down, seamless Begins at the neck and grows to the underarms Trying on as you knit and adjusting length Keep checking yoke depth before dividing for sleeves
Bottom-up, seamless Body and sleeves are knit separately, then joined for the yoke Knit patterns with established shaping Changing gauge or stitch counts can alter the yoke shaping
Seamed raglan Fronts, back, and sleeves are knit as pieces and sewn together Structured garments and flat-knitting practice Seams need careful matching along the diagonal edges

For a first cardigan, look for instructions that explicitly tell you where to place markers, when to increase, how to divide for sleeves, and how to work the front bands. Raglan placement directions can be difficult to interpret on a first cardigan even when the individual techniques are familiar.

The Artista Simple Raglan Cardigan pattern is listed as Level 2: Easy (Beginner+) and uses bulky/chunky-weight yarn. That makes it a reasonable option for a newer sweater knitter, but its yarn weight and gauge are specific to that design rather than a universal recipe for every cardigan.

Gauge decides whether a finished cardigan fits. The Artista pattern calls for approximately 10¼ stitches and 14 rows in a 4-inch by 4-inch stockinette-stitch swatch. Knit a generous swatch in the main fabric, treat it as you plan to treat the finished cardigan, then measure its stitch and row counts.

Choose size from the garment’s finished chest measurement, not by matching your body measurement exactly. The Artista cardigan’s finished bust options are 40, 44, 48, and 52 inches, and those measurements are intended to include positive ease. Its corresponding listed lengths are 25, 28, 31, and 34 inches, so choose bust and length together rather than assuming every size has the same body length.

Positive ease is the extra room between your body and the cardigan. Consider what will be underneath it: a close-fitting tee needs less room than a blouse or flannel shirt.

How to Knit a Top-Down Raglan Cardigan

A top-down raglan cardigan is worked from the neckline through yoke increases before dividing the body from the sleeves.

Step 1: Prepare Your Swatch, Needles, and Working Setup

  1. Read the full pattern once before casting on. Highlight the cast-on, marker placement, increase rows, short-row section, sleeve division, button-band instructions, and finishing instructions.
  2. Make your stockinette swatch. Change needle size if necessary.
  3. Choose a main circular needle setup that comfortably holds the yoke and body. A cord about 47–60 inches long is useful for the cardigan body and for spreading out the yoke during fit checks; confirm the exact cord setup in your pattern’s materials list.
  4. If you want firmer cuffs, hem, and button bands, use needles approximately one number or 0.5 mm smaller for ribbing. This is optional, but it helps ribbing draw in rather than flare.
  5. Gather removable stitch markers, locking markers for tracking rows or shaping, waste yarn or stitch holders, a tapestry needle, and buttons if your pattern calls for them.

Circular knitting needles make it easier to spread the live stitches across the shoulders for a fit check.

Step 2: Cast On and Mark the Cardigan Sections

  1. Cast on with a method that gives a neat, flexible neckline edge.
  2. Work the first wrong-side row in the stitch pattern your instructions specify.
  3. Place markers at each boundary: between the right front and first sleeve, first sleeve and back, back and second sleeve, and second sleeve and left front. Use markers that look different from the rest if you need a visual cue for the raglan lines.
  4. Keep the two front edge stitches easy to identify. They may become part of a built-in border or provide a clean edge for a later button band.

If you are using a measurement-based raglan calculation designed first for a pullover, a cardigan cast-on is the total stitch amount minus the stitches for the fronts, plus 2 for the edge stitches. Use that adjustment only when the calculation instructs you to create the front sections through later increases; a written cardigan pattern’s cast-on number takes priority.

Do not guess at the distribution of front, sleeve, and back stitches. The neckline shape, cardigan opening, and shoulder fit depend on that distribution.

Step 3: Work the Raglan Yoke and Increases

  1. Work right-side and wrong-side rows as written, keeping the front edges consistent.
  2. On each increase row, work the specified increase before and/or after each raglan marker. This adds fabric where the sleeves meet the body.
  3. Use the same increase method throughout unless the pattern directs otherwise. A make-one left increase leans left, while a make-one right increase leans right; paired together, they create tidy mirrored shaping.
  4. Count your stitches after increase rows, especially early in the yoke. Catching a missed increase now is much easier than finding it after several inches of knitting.
  5. If the pattern includes short rows to raise the back neck, use the turning method it names. For adapted short rows worked alongside raglan increases, the stopping point may be 5–10 stitches before the last turning stitch; confirm the exact stopping point in that pattern’s short-row instruction.

An upper-raglan cardigan can turn out oversized and loose. Before the yoke reaches the underarms, put the live stitches on a long cord or waste yarn and hold it around your shoulders. The neckline should sit where you want it, the raglan lines should angle comfortably across the shoulders, and the sleeve sections should be wide enough without swallowing the front sections.

Step 4: Divide the Body From the Sleeves

  1. Work across the first front section to the sleeve marker.
  2. Transfer the sleeve stitches to waste yarn, a holder, or a spare cord.
  3. Cast on the underarm stitches specified by the pattern, then continue across the back.
  4. Place the second sleeve stitches on a holder, cast on the second underarm stitches, and finish the row across the remaining front.
  5. Join the body fabric by continuing to work flat from one front edge to the other.

At this point, try the cardigan on again. The underarm should sit at a comfortable depth, and the fronts should meet or hang as the design intends. If the armhole feels too tight or too deep, correct it before knitting much farther on the body.

Step 5: Knit the Body and Finish the Hem

  1. Continue the body in stockinette stitch or the pattern stitch until it reaches the planned length.
  2. Work any waist shaping, pockets, texture, or color changes at the rows specified by your pattern.
  3. Change to the smaller ribbing needle if you chose one.
  4. Work the hem ribbing for at least 1.25 inches (3 cm) to help prevent the bottom edge from rolling.
  5. Bind off with enough flexibility that the hem lies flat and does not pull inward.

If the cardigan has built-in front bands, maintain their stitch pattern all the way down the body. If it has separate button bands, leave the front edges clean and follow the pattern’s instructions after the body is complete.

Step 6: Knit Both Sleeves

  1. Move one set of held sleeve stitches onto a circular needle.
  2. Pick up the underarm stitches specified by the pattern and join to work the sleeve in the round, or work it flat if the design calls for a seam.
  3. Use a 16-inch circular needle for sleeves, or use two circular needles for the magic loop technique or addiCraSyTrios; check the pattern’s sleeve materials list for its preferred setup.
  4. Work sleeve decreases, if included, at the stated intervals until the sleeve reaches the intended length.
  5. Change to the ribbing needle if you used one for the hem, work the cuff, and bind off flexibly.
  6. Knit the second sleeve, checking that its decrease placement and finished length match the first.

Place a marker at the beginning of each sleeve round and use it to keep decrease rows aligned.

Step 7: Add Bands, Buttons, and Finishing

  1. Work the button bands, collar, or neckline edging as the pattern directs.
  2. Make buttonholes at the pattern’s stated locations and confirm that each button passes through before sewing it on.
  3. Weave in yarn tails through the wrong side, following the direction of nearby stitches so the ends remain discreet.
  4. Sew buttons securely if the cardigan uses them.
  5. Wash and block the cardigan using the care method appropriate for its yarn. Lay it flat, arrange the front edges and raglan lines evenly, and let it dry completely before wearing.

Check the Fit Before Calling the Cardigan Finished

A finished cardigan should hang evenly from both shoulders, with matching raglan lines and sleeves that sit at the same height. Lay it flat and check that the front edges are parallel, the button bands are not pulling, and the sleeve cuffs match.

Try it on over the type of clothing you expect to wear with it. Move your arms forward and upward, close any buttons, and make sure the neckline remains comfortable.

Keep a project note with the yarn, needle sizes, measured gauge, selected size, body length, sleeve length, and any changes you made. That record makes a second cardigan far easier to plan.

Other Raglan Cardigan Construction Options

Raglan cardigans can be worked bottom-up by joining the body and sleeves or seamed from separate fronts, back, and sleeves.

Bottom-Up Raglan Cardigans

A bottom-up raglan begins with the body and sleeves separately. You knit the body to the underarms, knit two sleeves, then join all pieces and decrease through the yoke toward the neck, then bind off and complete the neckline and front-edge finishing the pattern specifies.

This can be a good choice when you prefer to establish hem, body length, and sleeve cuffs first. It is less convenient for trying on the upper body during the early stages, so follow the yoke stitch counts exactly.

Joining Raglan Seams in Knitting

A seamed raglan cardigan is made from separate fronts, a back, and sleeves. Block the pieces first so the edges lie flat and the dimensions are easier to match.

With right sides facing up, align a sleeve raglan edge with the matching diagonal edge of the cardigan front or back. Use mattress stitch, working through the edge bars on each piece and gently tightening the seam every few stitches. Repeat for all raglan seams, then sew sleeve and side seams from the cuff toward the hem. Weave in the seam yarn ends securely and block the finished cardigan once more so the seams settle smoothly.

Frequently Asked Questions

Are raglan sweaters easy to knit?

Raglan sweaters can be beginner-friendly when the pattern has clear marker placement, increase instructions, and a simple stitch pattern. A top-down cardigan is especially forgiving because you can assess the fit before the body and sleeves are complete. The Artista Simple Raglan Cardigan is categorized as Level 2: Easy (Beginner+), though matching its bulky/chunky gauge is still essential.

What is raglan knitting?

Raglan knitting is sweater construction that uses diagonal shaping lines between the neckline and underarms. The shaping can be made with increases in a top-down garment or decreases in a bottom-up garment. A raglan cardigan differs from a raglan pullover because its front stays open and is worked flat.

How do I knit raglan increases?

Work the increase method specified by the pattern immediately before, after, or on both sides of each raglan marker. Make-one increases are common because they create firm fabric without decorative holes, while yarn-over increases create an eyelet detail. Count after each shaping row so every section gains the intended number of stitches.

Can I turn a raglan sweater pattern into a cardigan?

You can adapt a measurement-based raglan calculation, but a written pullover pattern is not always safely converted by simply adding a front opening. For a calculator that starts with a pullover cast-on, use the total amount of stitches minus the front stitches plus 2 edge stitches. You must also plan front shaping, edge stitches, button bands, and a neckline that works when opened.

Do top-down raglan cardigans need seams?

Most top-down raglan cardigans do not need structural raglan seams because the yoke is knitted in one piece. You may still sew on buttons, reinforce a button band, or close a small underarm gap. Seamed raglan cardigans are a separate construction style made from individual pieces.