How to Make a Tank Top Hem Shorter
½ inch (1.27 centimeters) is the extra length to leave below the intended finished edge of a T-shirt-knit tank; turn that allowance to the inside for a clean shorter hem. A double-fold hem is a common choice for enclosing a woven tank’s cut edge. You can sew the hem for the most durable result or use fusible hem tape when you do not want to sew.
Know Your Tank Top Fabric and Existing Hem
Look at the fabric before cutting. Most casual ribbed, jersey, and T-shirt tanks are knit fabrics: they stretch across the body and have small loops in the fabric. Linen, cotton poplin, rayon challis, and many blouse-style tanks are woven fabrics: they have visible threads crossing at right angles and fray at a cut edge.
A neat shorter hem begins with preserving the length you want, not cutting to it.
A knit tank can usually use a single folded hem because T-shirt material does not fray much, if at all. It needs a stitch that can stretch with the fabric. A woven tank needs its raw edge folded under before the final fold, which prevents fraying and gives the inside a tidy finish.
Also inspect the original hem:
- A pair of parallel rows on the outside usually indicates a coverstitch or twin-needle hem.
- One row of small, slightly zigzagged stitches may be a stretch stitch.
- A blouse-style tank may have a narrow rolled or double-fold hem.
- A curved hem should stay curved. Do not straighten it unless you want to change the tank’s overall shape.
Wash and dry the tank the way you normally plan to care for it before altering it. This is especially useful for cotton tanks, which can change size after laundering.
How to Shorten a Tank Top With a New Hem
Choose the hem style that matches the fabric before you mark or cut.
| Tank Top Type | Best Hem Choice | Why It Works |
|---|---|---|
| Stretchy jersey, rib knit, or T-shirt material | Single-fold hem with a stretch stitch | Keeps bulk low and lets the hem stretch |
| Woven cotton, linen, rayon, or blouse fabric | Double-fold hem | Encloses the cut edge to prevent fraying |
| Lightweight woven fabric | Narrow double-fold hem | Reduces bulk at the bottom edge |
| Tank that cannot be sewn | Fusible hem tape | Creates a folded hem without stitching |
Step 1: Mark the Finished Length
- Put the tank on inside out. Stand naturally rather than lifting your arms or pulling the fabric down.
- Fold the existing hem upward to the length you want and place a pin or a small chalk mark at the new bottom edge. Check the front, sides, and back in a mirror if possible.
- Take off the tank while keeping it inside out.
- Lay it flat on a pressing surface.
- Transfer your desired finished-length mark across the front and back with tailor’s chalk or a washable fabric marker. Use the original hem, side seams, and any design details as placement references.
I use a sewing gauge to transfer the marked length around the tank because it keeps the new hem even without stretching a knit.
Step 2: Add Hem Allowance and Cut
For a knit tank, draw the cutting line ½ inch (1.27 centimeters) below the desired finished hemline. Cut along that lower line with sharp fabric scissors or a rotary cutter. The remaining allowance folds to the inside, leaving the tank at the length you marked.
For a woven tank with a standard double-fold hem, make the first line ½ inch (1.27 centimeters) below the desired finished length. Draw a second cutting line another ½ inch (1.27 centimeters) below the first line, then cut on the second line. The fabric between the cut edge and first line becomes the first fold; the next fold brings the hem to its finished length.
Cut slowly, especially on a curved or high-low hem. Keep both layers aligned, but do not assume the front and back are identical if the original tank has a shaped hem.
Step 3: Fold and Press the New Hem
For a knit tank, turn the cut edge ½ inch (1.27 centimeters) to the wrong side all the way around. Pin or clip the fold in place, then press it flat using an iron setting suitable for the fabric.
For a woven tank, fold the raw edge to the first marked line and press. Fold it again along the finished-hem line, enclosing the raw edge completely. Pin or clip the second fold and press again.
Work in short sections rather than trying to force the whole hem into place at once. On stretchy knit fabric, lift and set the iron instead of dragging it along the fold; pulling while pressing can create a wavy hem.
Step 4: Stitch the Hem Without Stretching It
Slide the tank over the free arm of your sewing machine if it has one. This helps you sew around the opening without accidentally stitching the front and back together.
For a knit tank:
- Select a zigzag stitch or your machine’s stretch stitch.
- Place the folded edge under the presser foot.
- Sew around the hem, keeping the topstitch ⅛ to 3/16 inch (3.2 to 4.3 millimeters) from the folded edge.
- Guide the fabric gently. Let the feed dogs move it; do not pull it from the front or back.
- Secure the thread ends, trim them, and press the finished hem lightly.
For a woven tank, use a straight stitch and sew around the folded hem close to its inner folded edge. Remove pins as you reach them rather than sewing over them. Finish by pressing the hem from the wrong side, then turn the tank right side out and check that it hangs evenly.
No-Sew Shortening With Fusible Hem Tape
Fusible hem tape is the cleanest no-sew choice when you want a permanent-looking shorter hem without using a machine. Choose a tape made for the fabric type; knit tanks need a flexible fusible product so the hem can still move with the garment.
- Try the tank on inside out and fold the existing hem to the length you want.
- Pin the folded hem temporarily, then remove the tank and lay it flat.
- Cut away the excess fabric, leaving about ½ inch for the new folded hem.
- Turn the cut edge to the wrong side and press the fold in place.
- Place fusible hem tape inside the fold, keeping it away from the outside edge so adhesive does not show.
- Press the hem using the tape’s stated temperature and pressing directions for your fabric. Avoid sliding the iron, which can shift the tape or stretch a knit.
- Let the hem cool flat before handling it. Check the entire circumference for loose spots, then re-press any section that did not bond.
Fusible tape works best on a simple, straight hem. It can be less reliable on very stretchy rib knits, heavily textured fabric, or tanks that will be stretched tightly during wear.
Making an Oversized Tank Top Fit Better
Shortening a hem changes the length, not the width. If an XL tank is loose through the body, underarms, or straps, it needs fitting adjustments in addition to a shorter hem.
Taking In the Side Seams
Turn the tank inside out and put it on. Pinch the excess fabric evenly at both side seams, beginning under the armhole and tapering toward the hem. Pin the new seam line, remove the tank carefully, and compare both sides so they match.
Sew the new side seams using a stretch stitch or narrow zigzag on a knit tank. Use a straight stitch on a woven tank. Try the tank on before trimming any excess fabric; once the fit is right, finish the raw seam edges with a zigzag stitch, serger, or another seam finish appropriate to the fabric.
Do not take in so much at the side seam that the armholes pull forward or the tank becomes difficult to put on. If the upper body is too large as well as the waist, a more involved alteration at the armholes may be needed.
Shortening Loose Straps
If the body fits but the neckline sits too low, shorten the straps at the shoulder seams rather than at the armhole. Pin each strap to the needed length while wearing the tank, then remove the tank and stitch the adjustment securely from the inside.
For lined or padded tanks, open only the seam needed to reach the strap construction. Reattach the lining neatly after stitching so the adjustment is not visible from the outside.
Handling Built-In Padding
Remove removable pads before hemming or taking in the side seams. Put them back after the alteration and make sure they sit flat in their pockets.
If pads shift because the pocket openings are stretched out, hand-stitch the opening smaller at the edge where the pad is inserted. If a permanently attached pad has come loose, secure it to the lining with a few small hand stitches rather than stitching through the outer layer of the tank.
Check the Fit and Keep the Hem Flat
Turn the tank right side out and inspect the hem before calling the project finished.
- The bottom edge should be even when the tank is laid flat.
- The hem should lie smooth rather than flipping outward.
- A knit hem should stretch gently without thread popping.
- The side seams should meet the hem at the same height.
- The inside should have no loose threads, exposed fusible tape, or raw woven edges.
Try the tank on and move naturally: raise your arms, sit down, and stretch lightly if it is an activewear-style tank. If the hem pulls upward in front or feels tight across the hips, remove the stitching or fusible tape before cutting more fabric away.
Avoid using a dryer as a way to shorten a tank. Shrinkage is unpredictable, can affect width as well as length, and may distort straps, printed designs, or built-in padding.
Frequently Asked Questions
Can You Hem a Shirt to Make It Shorter?
Yes, you can hem a shirt or tank top to make it shorter. Hemming keeps the cut edge finished, and the hem style should match the fabric. Hemming is the standard way to make a shirt or tank top shorter while keeping the cut edge finished. Knit shirts usually use a single folded hem with a stretch stitch, while woven shirts need a double-fold hem that encloses the raw edge.
Will Tank Tops Shrink in the Dryer?
Some tank tops can shrink in the dryer, especially cotton styles, but it is not a controlled way to shorten one. Dryer shrinkage may change the width, twist side seams, or make straps and necklines fit differently, so a marked-and-hemmed alteration is more reliable.
How Do You Sew a Very Narrow Hem?
Turn the raw edge under about 1/4 inch, press it, then fold it under another 1/4 inch to hide the cut edge. Stitch close to the inner fold while keeping the fabric flat. This narrow double-fold hem is useful for lightweight woven tanks where a wider hem would look bulky.
Can I Leave a Cut Knit Tank Top Edge Raw?
You can leave a cut edge raw on many T-shirt-knit tanks because the fabric does not fray much. The edge may roll upward, however, and the finished length can become less predictable. A folded hem or fusible hem tape gives a cleaner, more stable result.
How can you shorten a long knit tank top without sewing?
You can shorten a knit tank top without sewing by using iron-on hem tape. Cut the tank ½ inch longer than the finished length, fold that allowance to the inside, and place the tape in the hem.
