How to Sew a Tissue Holder: Step-by-Step Purse Packet Guide
Two ends are serged; confirm the exact edge placement in the pattern instructions for the construction method you choose. For an easy purse tissue holder without a serger, sew one fabric rectangle into an overlapping sleeve and slide a packet of tissues inside. This beginner project builds useful skills in measuring, pressing, straight stitching, and finishing raw edges neatly.
How a Fabric Tissue Holder Works
A purse tissue holder is a soft fabric sleeve that wraps around a travel-size tissue packet. The tissue packet stays inside the sleeve, while its opening sits beneath the overlap in the fabric so you can pull out one tissue at a time.
Woven cotton is an especially friendly choice for a first holder because it presses crisply and is easy to sew. Choose a print you enjoy seeing in your bag, plus thread that blends into the fabric or stands out deliberately as a decorative detail.
You can sew this project by machine or by hand. A machine makes the seams faster, but a small backstitch will hold the side seams securely if hand sewing is what you have.
How to Sew a Simple Purse Tissue Holder
Gather woven fabric, matching thread, fabric scissors, a ruler or tape measure, pins or clips, an iron, a sewing needle or sewing machine, a seam ripper, and a travel-size tissue packet.
Choose the construction that suits your tools before cutting fabric.
| Holder Style | Best For | Fabric Preparation | Closure |
|---|---|---|---|
| Folded sleeve | Carrying a tissue packet in a purse or backpack | One 9-by-10-inch rectangle | Overlapping fabric opening |
| Serged-edge holder | Practicing with a serger | Fabric prepared according to the pattern | Overlapping fabric opening |
| Zipper pouch | Carrying loose tissues or a tissue packet with other small supplies | Two matching fabric panels | Zipper |
Step 1: Cut and Press the Fabric
- Press your fabric so wrinkles do not distort the cut edges or seams.
- Cut one rectangle measuring 9 by 10 inches.
- Place your tissue packet on the fabric briefly to make sure the scale looks suitable for the packet you plan to carry.
- Keep the fabric right side down on your work surface.
A holder does not need to fit tightly around the packet. A little room makes it easier to replace the tissues later, while an overlapping opening keeps the packet from slipping out.
Step 2: Finish the Two Short Ends
- Identify the two shorter raw ends of the rectangle.
- Fold one raw edge toward the wrong side, press it, then fold it over once more to enclose the raw edge.
- Stitch close to the inner folded edge.
- Repeat on the other short end.
These finished edges will become the visible edges of the tissue opening. Pressing before stitching is worth the extra moment because the two ends need to lie flat when they overlap.
If you are hand sewing, use a running stitch for a simple edge finish or a backstitch if you want a stronger seam. Keep the stitches even so the fabric edge does not ripple.
Step 3: Fold the Sleeve Around the Tissue Packet
- Lay the fabric wrong side up, with the finished edges facing left and right.
- Set the tissue packet in the center as a fitting guide, with the packet opening facing up.
- Fold one finished fabric edge toward the center.
- Fold the other finished edge toward the center so it overlaps the first edge.
- Adjust the overlap so the packet opening will sit beneath it but tissues can still be pulled out.
- Remove the tissue packet carefully, keeping the folds in place.
- Pin or clip the top and bottom long edges.
Do not sew with the packet inside. It is only there to help you judge the overlap and make sure the sleeve will hold the tissues comfortably.
Step 4: Stitch the Side Seams
- Sew a straight seam along one open long side.
- Sew the second open long side in the same way.
- Use a 1/4-inch seam allowance on both side seams.
- Backstitch at the beginning and end of each seam, or knot your thread securely if hand sewing.
- Remove pins or clips as you sew rather than stitching over them.
The side seams hold the folds in place and turn the flat fabric into a sleeve. If your machine pulls the layers unevenly, stop with the needle down, lift the presser foot, straighten the fabric, and continue.
Step 5: Turn, Fill, and Test the Holder
- Turn the holder right side out through the overlapping center opening.
- Use a finger, knitting needle, or blunt point turner to ease out the corners without poking through the stitching.
- Press the holder flat, taking care around the overlapping opening.
- Slide in the tissue packet.
- Pull the first tissue gently through the fabric opening.
- Trim loose threads.
Tissue Holder Variations
A packet holder dispenses tissues one at a time, while a zipper pouch keeps tissues and small purse essentials contained.
Serged-Edge Tissue Holder
For a serged-edge holder, serge two ends before inserting the package of tissues. Keep the two serged ends at the tissue opening when you fold the holder with wrong sides together.
After the edges are serged, fold the holder with wrong sides together, align the prepared edges as directed by the pattern, serge the remaining end seams, and insert the tissue packet. Check that the tissue opening faces outward before you finish the last seam, then secure the serger thread chains by threading them back into the serged seam or cutting the thread chains off and applying seam sealant.
Zipper Tissue Pouch
A zipper pouch is better for storing loose tissues, a packet of tissues, lip balm, or other small purse essentials. It does not dispense tissues as smoothly as an overlapping sleeve, but it keeps the contents contained.
- Cut two matching fabric panels sized for the tissue packet or items you plan to carry, allowing for seam allowances.
- Place the zipper face down along the top edge of one panel, right sides together, and stitch with a zipper foot.
- Attach the other zipper tape to the top edge of the second panel in the same way.
- Press the fabric away from the zipper and topstitch beside the zipper tape if you want a flatter finish.
- Open the zipper partway before sewing the pouch closed; this gives you a way to turn it right side out.
- Put the fabric panels right sides together and stitch around the three remaining sides.
- Turn the pouch right side out through the open zipper, push out the corners, and close the zipper to test it.
Use a packet holder when you want tissues available one at a time. Use a zipper pouch when you want a small, closed organizer.
Fix Common Tissue Holder Problems
Adjusting folds, side seams, overlap, tension, and exposed edges corrects common tissue holder fit and sewing problems.
Tissues Catch at the Opening
The overlap may be too deep, or the packet opening may not be centered beneath it. Remove the tissue packet, turn the holder inside out, and resew one side seam after adjusting the folds to create a less restrictive opening.
The Holder Is Too Loose
A loose sleeve usually means the folds did not wrap closely enough around the packet before the side seams were stitched. Turn the holder inside out and take in one or both side seams slightly, testing the packet fit before trimming any excess fabric.
The Holder Is Too Tight
If the packet buckles or cannot slide in, unpick one side seam with a seam ripper and reduce the overlap. Stitch the seam again after checking that the packet sits flat.
The Seams Pucker
Puckering often comes from uneven tension, unpressed folds, or fabric being pulled while sewing. Press the seams, then check that the thread is feeding smoothly and guide the fabric rather than tugging it through the machine.
Raw Edges Show at the Opening
Raw edges show at the opening when the two short ends were not hemmed or serged before folding. Turn the holder inside out, finish the exposed edge with a narrow hem or serged finish, then restitch the affected side seam.
Check and Care for Your Tissue Holder
Before putting the holder into daily use, check these details:
- The tissue packet slides in without forcing the seams.
- The tissue opening lines up with the packet opening.
- One tissue can be pulled out without dragging out several.
- No pins, clips, or loose threads remain inside the holder.
Remove the tissue packet before washing the holder. Launder it according to the care needs of the fabric and thread you selected, then let it dry completely before inserting a fresh packet. Keeping a few holders in different fabrics makes it easy to swap one out when it needs washing or when you want a seasonal print.
Frequently Asked Questions
How do I sew a Kleenex holder?
Sew an overlapping fabric sleeve around a travel-size tissue packet. Pin the side seams in place and sew a straight line along each side, leaving a 1/4-inch seam allowance. Insert the packet and pull the first tissue through the overlap.
How do I make a tissue holder for a purse?
A 9-by-10-inch fabric rectangle makes a useful starting size for a compact purse tissue holder. Hem the shorter ends, fold them toward the center around the packet as a guide, and sew the two long sides closed. Choose a medium-weight woven cotton so the holder stays flat without feeling bulky.
How do I make a tissue holder with a zipper?
Make a small zipper pouch from two fabric panels and a zipper placed along the top edge. Stitch the zipper to both panels, open it partway, sew the three remaining sides with right sides together, then turn the pouch right side out through the zipper opening. A zipper pouch is best for loose tissues or a packet stored with other purse supplies.
Do I need a serger to make a tissue holder?
No, a regular sewing machine or hand needle works well for a folded tissue sleeve. For a serged-edge construction, serge two ends. A narrow hem is a simple alternative when you do not have a serger.
