From Frumpy to Fabulous: Mastering the Art of Sewing Clips onto Wigs

Wigs have become a popular accessory for both fashion and practicality. They can add a touch of glamour to any outfit or provide a quick solution for a bad hair day. However, for those new to the world of wigs, one aspect may seem daunting – the clips. These small but mighty pieces play a crucial role in securing your wig in place and ensuring it stays put throughout the day. Whether you’re an experienced wig-wearer looking to switch up your look or a novice trying out wigs for the first time, learning how to sew clips on a wig is an essential skill to have. In this article, we’ll share some key tips and tricks to help you master this simple yet significant technique and rock your wig with confidence.

Understanding Wig Clips

Wig clips are small combs that are attached to the inside of a wig to secure it onto your head. They are typically made of metal or plastic and have small teeth that grip onto your hair. Wig clips come in various sizes and can be sewn or clipped onto the wig itself.

Why Use Wig Clips

Wearing a wig can help you achieve a flawless and natural-looking hairstyle. However, one of the biggest concerns when wearing a wig is its security. No one wants their wig to shift or fall off during daily activities. This is where wig clips come in handy. They provide extra security for your wig, giving you peace of mind while wearing it.

Using wig clips also allows for versatility in styling. You can wear your wig with confidence, knowing that it will stay in place no matter how active you are. Additionally, using wig clips can prevent damage to your natural hair from constantly pulling on combs and elastic bands.

Types of Wig Clips

There are two main types of wig clips: sew-on and snap-on. Sew-on clips require you to physically sew them onto the inside of your wig, while snap-on clips simply clip onto the wefts of the wig.

Sew-on clips are preferred by many because they offer a stronger hold and are less noticeable when worn. They also allow for more customization, as you can choose where to place them on the inside of your wig for maximum security.

Snap-on clips, on the other hand, are easier and faster to attach but may not provide as sturdy of a hold as sew-on clips. They are also slightly more visible when worn.

Both types of clips come in different sizes, so make sure to choose ones that fit comfortably on your head without being too tight or too loose.

How To Sew Wig Clips

If you have chosen to use sew-on clips for your wig, here is a step-by-step guide on how to sew them onto your wig:

1. Measure and Mark: Start by measuring the placement of the clips on your wig. You can use a measuring tape or simply eyeball it. Mark the areas where you want to attach the clips with a small dot using a washable fabric marker or chalk.

2. Prepare Your Wig: Before sewing, make sure your wig is secured onto a canvas head or mannequin head. This will make it easier for you to work on and ensure that the clips are placed in the correct position.

3. Thread Your Needle: Use a thread color that matches your wig’s wefts to create an invisible stitch. You can double up the thread for added strength.

4. Sewing Technique: Place the clip against the marked area and start sewing from one side of the clip, going back-and-forth through its holes using a whipstitch technique. Make sure to pull the thread tight after each stitch for a secure hold.

5. Tie It Off: Once you have stitched all around each clip, tie off your thread with a knot and cut off any excess thread.

6. Repeat Steps: Repeat this process for all other clips until they are attached securely onto your wig.

How To Snap-On Wig Clips

If you have opted for snap-on clips, here’s how to attach them to your wig:

1. Part Your Wig: Part your hair at the point where you want to attach each clip using either a tail comb or your fingers.

2. Place The Clip: Open up one clip by pressing down on its center tab and place it underneath the parted section of hair on one side of your head.

3. Snap The Clip In Place: Hold onto both ends of the clip and snap it closed by pressing down on both sides of the center tab. Make sure it is secured tightly against your head.

4. Repeat Steps: Repeat this process for all other clips, evenly spacing them apart for a secure fit.

Tips For Properly Using Wig Clips

– For added security, sew a small piece of elastic over the clips to keep them in place while wearing the wig.
– Make sure to place the clips on areas of your head where there is hair, as they need something to grip onto.
– Avoid placing the clips too close to the edge of your wig, as this can cause discomfort and make it more visible when worn.
– Test out different placement options and clip sizes to find what works best for you and your specific wig.
– If you have sensitive skin, consider covering the teeth of the clips with a small piece of fabric or padding for added comfort.

Wig clips are a great investment for anyone looking to wear wigs regularly. They provide extra security, versatility in styling, and overall peace of mind when wearing a wig. Whether you choose sew-on or snap-on clips, properly attaching them onto your wig will ensure that you can confidently wear your wig without worrying about it shifting or falling off. With these helpful tips

Introduction to Sewing Clips on a Wig

Sewing clips onto a wig is a task that may seem daunting, but it is actually quite simple with the right tools and techniques. Whether you are new to wig styling or a seasoned professional, knowing how to sew clips onto a wig can be a valuable skill that allows you to customize and secure your wigs in place. In this comprehensive guide, we will walk you through the steps of sewing clips onto a wig, from gathering the necessary materials to attaching the clips to the wig.

Before You Begin

Before you start sewing clips onto your wig, it is important to have all of your materials in one place. This will make the process smoother and quicker. You will need the following items:

– A wig (either synthetic or human hair)
– Hair clips (also known as toupee clips)
– Needle and thread (matching the color of your wig)
– Scissors
– Measuring tape or ruler
– Marking pen or chalk
– Thimble (optional but recommended)
– Pins (optional but can be helpful)

Once you have all of these items ready, you can start preparing your wig for clipping.

Preparing Your Wig for Clips

The first step in sewing clips onto a wig is preparing the base of the wig for clipping. If your wig already has wefts (strips of hair sewn onto the cap), locate them and mark their position on the inside of the cap with a pen or chalk. These marks will serve as guidelines for placing your clips evenly around the perimeter of the wig.

Next, determine how many clips you will need by measuring around the perimeter of your head where you want to attach them. A good rule of thumb is to use one clip every 3 inches, but this may vary depending on personal preference and hair density.

Sewing the Clips onto the Wig

Now that you have your wig and clips prepared, it is time to start sewing. Here are the steps to follow:

1. Thread your needle with a length of thread that is double the usual length you would use for sewing. This will make it easier to tie off at the end.

2. Take one of your clips and hold it in place on top of one of your markings inside the wig. The comb side should be facing towards the center of the wig.

3. Insert your needle through one hole on the clip and then loop it through one weft edge at that marking, making sure to secure both sides of the weft.

4. Take a stitch through each hole in the clip before looping through a different weft edge, until you have gone through all holes on the clip.

5. Once you reach back to where you started, take several back stitches (inserting needle behind previous stitch) before tying off with strong knots.

6. Repeat these steps for each clip placement until all clips are securely sewn onto the cap.

Trimming Excess Thread and Finishing Up

After you have sewn all clips onto your wig, it is time to trim any excess thread for a cleaner look. Trim close to where you tied off knots but be careful not to cut any knots or wefts in the process.

Your wig is now ready to be worn with added security and stability thanks to your newly attached clips!

Tips for Sewing Clips onto a Wig like a Pro

– Use clear thread if you are working with a lighter colored wig or colored thread that matches if using darker colors.
– Stretch out each piece of hair as straight as possible before attaching clips for better hold.
– Use more than one clip on each side if necessary depending on hair density.
– Use an adhesive such as wig tape or glue for added security if desired.
– Practice on a scrap piece of fabric first if you are new to sewing clips on wigs.

Sewing clips onto a wig may seem like a challenging task, but with the right materials and techniques, it can be done easily and effectively. By following these steps and tips, you can customize your wigs to provide a more secure fit for all-day wear. Remember to always take your time and be careful when working with needles and scissors. With practice, you will become an expert in attaching clips onto wigs like a pro!

Q: What are wig clips and why do I need to sew them on my wig?
A: Wig clips are small metal or plastic pieces that are attached to the underlining of a wig in order to secure it onto the wearer’s hair. Sewing them on ensures that the wig stays in place and prevents it from slipping or falling off.

Q: Where can I purchase wig clips?
A: Wig clips can be purchased at most beauty supply stores, online retailers, or craft stores. They come in various sizes and colors, so make sure to choose ones that match your wig and hair color.

Q: What kind of needle and thread should I use for sewing the clips onto my wig?
A: It is recommended to use a strong polyester thread and a sewing needle with a small eye, such as a #18 or smaller. This will help ensure that the thread doesn’t break while sewing.

Q: How many clips do I need for my wig?
A: The number of clips needed depends on the size of your wig and personal preference. Most wigs have 2-4 places where clips can be attached, so it’s recommended to use at least 2-3 clips for a secure fit.

Q: How do I properly sew the clips onto my wig?
A: Start by placing the clip on the underside of the wig where you want it to be attached. Then, using a backstitch, sew around the edges of the clip, making sure to reinforce any weak points. Finish by knotting off your thread securely.

Q: Can I remove or reposition the clips once they are sewn on?
A: It is possible to remove or reposition wig clips if necessary. Simply cut off any excess thread and carefully remove the clip from its original position. Make sure to properly secure it in its new position by sewing it on securely with a backstitch.

In conclusion, learning how to sew clips on a wig is a valuable skill for anyone looking to enhance their wig-wearing experience. By following the steps outlined, one can easily attach and secure clips to their wigs for a more comfortable and secure fit. Not only does this technique provide convenience, but it also offers the versatility of being able to switch out different wig styles with ease.

Additionally, understanding the importance of proper clip placement and placement can greatly impact the overall appearance of the wig. Taking the time to carefully measure and position the clips will ensure that the wig looks natural and seamless on your head.

Moreover, having a few extra clips on hand can come in handy for any future wig styling needs. These small yet practical tips can save you time, money, and frustration in the long run.

Furthermore, this process shows that with a little bit of patience and practice, anyone can master the craft of sewing clips on a wig. It not only adds personalization but also allows one to have more control over their hairstyle without damaging their natural hair.

Ultimately, learning how to sew clips on a wig is an essential skill for any wig wearer. Not only does it provide convenience and versatility, but it also allows for a more natural and secure fit. With these simple steps and

Author Profile

Jill Nammar

My name is Jill but everyone calls me Jilly. I design original cross stitch patterns inspired by vintage French and flowers. Roses are my muse.
I hope you have a cozy time stitching my patterns. Put the kettle on, relax and create a heartwarming piece of hand-embroidered art. Personalize your home and turn up the soulful charm with soulful stitchery.

My goal is to provide you with pretty patterns that promote peaceful stitching. My wish is for you to discover the gentle beauty of hand-embroidery.My patterns have been featured around the web and in Homespun Magazine and Boston Magazine. I find my bliss in cross stitch.

From 2024, I have embarked on a new venture—writing an informative blog on the “Embroidery and Cross-Stitch” niche. This blog is an extension of my passion, where I share detailed posts and respond to queries related to embroidery and cross-stitching.

The blog covers a wide range of topics from beginner tips, pattern creation, historical insights, and the therapeutic benefits of stitching. My goal is to build a community where enthusiasts can learn, share, and grow in their embroidery skills, ensuring everyone can find their own bliss in cross-stitch just as I did.

Thank you to all my customers and readers who have supported Sew French. Your kind emails, photos of completed patterns, and continual encouragement fuel my dedication to this beautiful craft. Join me in stitching a world of beauty and peace, one pattern at a time.