How to Fix a Small Hole in Leggings
A 16–18-inch length of matching thread is enough to close most small holes in leggings with a flexible hand-sewn braid stitch. The key is to catch solid knit fabric beside the hole, not the frayed edge, and to keep the stitches loose enough to move when the leggings stretch. Start with a sewn repair for a hole in the body of the leggings; use glue only for a tiny, low-stretch pinhole.
Identify the Hole Before You Mend It
Look at the damage from both sides before cutting or sewing anything. A small hole in the middle of the leg is repaired differently from an opening in a seam or a thin, worn area at the inner thigh.
Modern leggings are knit tubes with seams that shape and join the garment. That basic tube construction is not new: the Milwaukee Public Museum describes traditional leggings made by sewing the open edges of folded material into a tube. For a modern pair, that means it is important to tell a broken seam from a puncture in the knit fabric.
A snagged loop needs special care. If a thread is still attached, gently pull it to the inside with a needle tip rather than snipping it off. Cutting the loop can turn a snag into a larger hole.
For thin, stretchy leggings, skip microweave darning; its rigid woven grid is likely to fight the fabric’s stretch.
Use this guide to choose a repair before you begin.
| What You See | Best Repair | What to Avoid |
|---|---|---|
| A clean pinhole in the leg fabric | Hand-sewn braid stitch | Pulling the edges tightly together |
| A tiny hole in a low-stretch area and no sewing supplies | Flexible fabric glue | Rigid household glue |
| A hole at the knee, inner thigh, or another worn spot | Braid stitch with a stretch patch behind it | Sewing only into thin, weakened fabric |
| An opening along a seam | Reseam the original seam line | Lacing across the gap like a surface hole |
| A hole in mesh | Patch from the inside with matching mesh | Expecting an invisible repair |
| A long run, several holes, or fabric that has gone sheer | Reinforce with a patch or repurpose the leggings | Repeatedly stitching into failing fabric |
How to Fix a Small Hole in Leggings With a Braid Stitch
A hand-sewn braid stitch is the best all-around choice for a small hole in the main body of stretchy leggings. It closes the opening while allowing the surrounding knit to flex.
Step 1: Gather the Thread and Prepare the Leggings
- Turn the leggings inside out. Working from the wrong side keeps the knot and most of the thread less visible.
- Use a fine hand-sewing needle and thread that closely matches the leggings’ color. Standard sewing thread is usually less bulky than embroidery floss for this job.
- Cut a 16–18-inch length of thread. That is long enough to finish a small repair without leaving so much thread that it tangles easily.
- Trim only truly loose, broken fibers around the hole. Do not enlarge the opening to make it look neater.
- Thread the needle and tie a small knot at the end.
Step 2: Support the Knit While You Work
- Slide a finger inside the leggings and place it directly beneath the hole.
- Gently stretch the surrounding fabric over your finger just enough to flatten the edges. Do not stretch it to its full width.
- Check that the edges meet naturally. If one side has curled under, smooth it flat with the needle tip.
Step 3: Sew the Braid Stitch Across the Hole
- Start on the inside of the leggings, bringing the needle up through strong fabric right beside one edge of the hole. Keep the knot on the inside.
- Take a tiny bite of solid knit near the opposite edge, then bring the needle back to the first side.
- Continue moving back and forth across the opening. The thread should resemble the lacing on a shoe: one small stitch from one side, then one from the other.
- Pull each stitch snug enough to bring the edges together.
- Keep taking small bites close to the hole until the gap is closed.
Do not stitch into fuzzy, damaged fibers at the edge. Those fibers are already weak and can pull free. Catching intact knit just beyond the damage gives the repair something stable to hold.
Step 4: Secure and Test the Repair
- After the last stitch, take the needle to the inside of the leggings.
- Pass the needle under a nearby stitch, through the loop it creates, and pull gently to form a knot. Repeat once for security.
- Trim the thread tail close to the knot without cutting the knot itself.
- Turn the leggings right side out and smooth the repaired spot with your fingers.
- Gently stretch the fabric in the directions it normally stretches. The repair should lie flat, with no opening or tight ridge.
If the hole gaps when you stretch it, add a few more small stitches. If it puckers, redo the affected stitches rather than trying to force the fabric flat.
No-Sew and Reinforced Repair Options
Use Flexible Fabric Glue for a Tiny Pinhole
Flexible fabric glue can stop a very small pinhole from growing when the area does not receive much pulling or friction. It is most useful as a quick repair for a tiny puncture, not a seam split, knee hole, or worn inner-thigh area.
- Turn the leggings inside out and lay the damaged spot flat.
- Bring the two edges of the pinhole together without overlapping them.
- Apply a thin line of flexible fabric glue along the inside edges of the hole.
- Press the edges together so the glue holds them in place.
- Leave the leggings flat until the adhesive is fully dry. Do not stretch, wash, or wear the leggings while the glue is wet or tacky.
- Once dry, turn the leggings right side out and gently stretch the area to make sure the glue remains flexible.
Avoid stiff craft glue, super glue, or hot glue. Those adhesives can create a hard spot that cracks when the knit fabric stretches.
Add a Stretch Patch Behind a Worn Hole
A patch is worth the extra effort when the hole is at a knee, inner thigh, or other place where the fabric has thinned. The patch supports the surrounding knit so the repaired hole is less likely to reopen.
- Choose a soft stretch-knit patch that is close in weight and stretch to the leggings. A piece cut from an altered pair of leggings can work well.
- Cut the patch with rounded corners and enough coverage around the worn area.
- Turn the leggings inside out and place the patch behind the hole, aligning the direction of stretch with the leggings.
- Close the hole using the braid stitch.
- Sew around the outer edge of the patch with small stitches. Keep the patch smooth as you sew.
- Knot the thread on the inside, trim the tail, turn the leggings right side out, and gently test the stretch.
A matching patch may still show slightly on lightweight leggings.
Repair Special Types of Legging Damage
A Hole in the Knee or Inner Thigh
A knee hole often has a clean edge from catching on something, while an inner-thigh hole is more likely caused by friction and fabric wear. If the fabric around the opening feels thin, use an inside patch as well as stitches.
For a clean knee puncture, the braid stitch alone may be enough. For a hole surrounded by pilling, thinning, or a faded area, reinforce the repair first.
A Pin-Size Hole in Nylon Leggings
Nylon or performance-fabric leggings can be slippery and fine, so use a very fine needle and keep your stitches especially small. Hold the fabric lightly over a finger instead of stretching it hard; slick knit can distort quickly under tension.
Do not use an iron-on patch for a tiny nylon hole unless you know the garment can tolerate the heat. A hand-sewn repair or flexible fabric glue is safer for preserving the stretch and smooth finish of the fabric.
A Split Seam
A seam split is not repaired by lacing across the opening. Instead, bring the original seam edges back together along their original line.
- Turn the leggings inside out and align the seam edges without overlapping them.
- Begin in an intact part of the seam, then sew small stitches along the original seam line through both seam allowances.
- Continue past the end of the split into intact seam fabric.
- Knot the thread securely on the inside, trim the tail, and test the seam with a gentle stretch.
If the seam keeps separating or the fabric beside it is damaged, add a small stretch patch behind the area before wearing the leggings again.
A Hole in Mesh Leggings
Mesh can be repaired, but it is harder to make invisible because the open structure is part of the fabric’s look. Put a matching mesh patch behind the hole and stitch around the damaged area through undamaged mesh.
Keep the patch flat and orient its mesh in the same direction as the original. Finish with secure knots on the inside, then gently stretch the repaired section. The goal is to stabilize the hole and preserve the garment’s shape, not to recreate every missing mesh opening.
Check the Repair and Help It Last
Before wearing the leggings, inspect the repair in bright light and test it with your hands.
- The right side should lie flat without a tight, puckered ridge.
- The hole should stay closed when the fabric is gently stretched.
- Thread ends and knots should be on the inside.
- A glued area should feel dry and flexible, not tacky.
- A patch should stay smooth without folding or pulling at the edges.
To prevent another hole, turn leggings inside out before washing, keep them away from rough Velcro and open zippers, and avoid pulling at snags. Repairing a pinhole promptly is easier than waiting for the knit to separate farther.
If the repair holds flat and stretches comfortably, wear the leggings as usual. If the fabric is thin across a broad area or several holes keep appearing, save the remaining fabric for small sewing tests or craft patches and replace the pair for active wear.
Frequently Asked Questions
Can I Fix a Hole in Lululemon Leggings?
Yes, a small clean hole in leggings can be repaired with a braid stitch or a patch. If you want to ask the brand about current product support, photograph the damage and contact the company before trimming, sewing, or gluing the leggings. Altering the garment can change its condition for a return or assessment.
Can You Fix a Hole in Leggings Without It Showing?
Often, yes. A small hole is least noticeable when you use thread that closely matches the color, take tiny stitches through solid fabric, and keep the knit at its relaxed size while sewing. A repair on thin, shiny, or mesh fabric may remain visible up close even when it is secure.
Is a Sewing Machine Better for Repairing Leggings?
A sewing machine is useful for a split seam or for attaching a larger stretch patch, especially if your machine has a stretch stitch. For a pinhole in the middle of a leg, hand sewing is usually easier because you can control each tiny stitch and avoid catching extra fabric. Test any machine stitch on a scrap of similar stretch fabric before sewing the leggings.
What Should I Do With Leggings That Have Several Holes?
Leggings with several holes can still be useful if the fabric between the holes remains strong enough for a patch. If the material has become thin, sheer, or has lost elasticity over a wide area, repeated repairs are unlikely to last. For a pair you want to keep, choose the smallest stable hole and mend it now before the edges fray farther.
How do you mend a small hole in the knee of leggings?
Make alternating, closely spaced passes from one side of the knee hole to the other with a braid stitch, using undamaged material next to the tear. For additional support, sew a fabric backing onto the inner side of the repair, then lightly stretch the area to check that it holds.
