How to Weave a Wicker Basket

About 4 or 5 days of soaking may prepare dry willow for weaving a small, firm wicker basket. The calendar is only a starting point: a willow rod must also bend cleanly before you weave it. This beginner method uses a round willow base, upright stakes, and a simple two-weaver twining stitch for the sides.

What Wicker Basket Weaving Means

Wicker is a weaving method, not one particular plant. A wicker basket is made by weaving flexible strands around a supporting framework.

In this project, the framework is made from thicker willow rods called stakes. The thinner, more flexible rods are called weavers. You will weave the weavers around the stakes to create the base and sides.

For a firm, self-supporting beginner basket, choose stake-and-strand willow rather than fabric strips.

Raffia, fabric strips, and soft cord can make lovely decorative bowls and wall pieces. Willow is the better choice when you want a basket that stands upright on its own.

Choose Willow and Basic Basketry Tools

Choose willow that is intended for basket weaving. It needs to bend repeatedly without snapping, and you will want a mix of thicker rods for the base and stakes and thinner rods for the weaving.

Use this guide to gather materials before you begin.

Material or Tool What It Does Best Use in This Project
Thick willow rods Form the base framework and upright stakes Choose straight, sturdy rods
Thin willow rods Create the woven base and sides Choose flexible, even rods
Bucket or tub of water Soaks dry willow Fully submerge the rods
Pruning shears or sturdy scissors Cuts willow cleanly Trim rods and ends
Sharp knife Splits base sticks Make the central base opening
Bodkin, pointed stick, or 6-inch nail Opens space between woven rows Tuck in ends and add stakes
Flat work surface and a small weight Keeps the base stable Hold the basket in place while weaving

If you are starting with dry willow, submerge it in water. Check each rod before use rather than relying only on the soaking time.

Use the bend test to decide whether soaked willow is ready, rather than trusting the calendar alone.

Bend a rod to about 90 degrees. It is ready if it bends without cracking and the bark does not split at the butt, or thicker end, of the rod. If it cracks, keep it damp and allow more soaking time before weaving.

How to Weave a Small Willow Wicker Basket

A small willow wicker basket is woven from an 8.5-inch round base, raised stakes, and twined sides 3 1/2 inches high.

Step 1: Sort the Willow by Thickness

  1. Set aside the thickest straight rods for the base sticks and side stakes.
  2. Choose medium-thickness rods for the early structural rows.
  3. Reserve the thinnest, most flexible rods for the main weaving and rim work.
  4. Keep the rods covered or wrapped in a damp towel while you work so they remain pliable.

Work with the thicker butt ends where the basket needs strength. The thinner tips are easier to tuck into finished rows.

Step 2: Prepare the Base Sticks

  1. Cut the butt end of several thick willow rods into 12-inch lengths.
  2. Divide the base sticks into two groups.
  3. Split the middle of one group lengthwise for about 2 inches.
  4. Slide the unsplit group through those openings to form a flat cross, sometimes called a slath.

Arrange the sticks so they spread outward as evenly as possible. The ends will become the spokes of the basket base.

Step 3: Weave the Round Base

  1. Select two thin, flexible weavers.
  2. Insert their thinner tip ends into the split of the slath.
  3. Begin pairing: take one weaver over a base spoke and the other under it, then twist the two weavers around each other before moving to the next spoke.
  4. Continue around the center, pulling each pass snugly against the previous one.
  5. As the base expands, separate the spokes gradually so they radiate evenly like wheel spokes.
  6. Add another weaver when one becomes too short by laying the new rod alongside the old one and continuing the same over-under path.

Keep pressing the woven rows close together. A loose base will not become tighter when the basket is finished.

Continue weaving until the base measures 8.5 inches (22 cm) across. Check that it lies flat before moving on; gently adjust the spacing of the spokes while the willow is still damp.

Step 4: Add and Raise the Side Stakes

  1. Use a bodkin or pointed tool to open two spaces beside each base spoke near the outer edge.
  2. Insert a sturdy side stake into each opening, with its thicker end pushed down into the base.
  3. Space the new stakes evenly around the edge.
  4. Place a small weight on the center of the base to hold it flat.
  5. Bend the stakes upward gradually, working around the basket rather than forcing one stake sharply into position.

The upright stakes establish the basket’s shape. Keep them vertical for a straight-sided basket, or angle them slightly outward for a shallow bowl shape.

Step 5: Start the Two-Weaver Twining Stitch

  1. Choose two flexible weavers for the side wall.
  2. Place the first weaver behind a stake, leaving a short end about 8 to 10 inches long inside the basket.
  3. Position the second weaver so one strand is in front of the stake and one is behind it.
  4. Cross the front strand over the back strand, then carry it behind the next stake.
  5. Repeat the motion: the strand now in front crosses over its partner and goes behind the following stake.
  6. Pull each stitch firm, then push the row down against the row beneath it.

This is twining. The two rods twist around one another as they travel around the stakes, creating a secure and attractive band.

Continue twining around the basket, keeping the rows level. If the basket begins to flare or narrow unintentionally, adjust the angle of the stakes before adding more rows.

Weave the sides to 3 1/2 inches (9 cm) high or a little more. Finish a full circuit before deciding whether the height looks even.

Step 6: Make a Simple Cut-and-Tuck Rim

  1. Complete a final row of twining and press it firmly down.
  2. Trim the remaining upright stakes to 2 inches long above the final woven row.
  3. Bend one trimmed stake over the rim toward the inside of the basket.
  4. Use the bodkin to open a channel between woven rows.
  5. Tuck the stake end down into that channel.
  6. Repeat around the rim, alternating the direction of the tucked ends if that helps the rim sit evenly.
  7. Trim any protruding tips neatly and make sure no sharp cut ends remain exposed.

The tucked rim locks the side stakes in place and gives the basket a clean edge without requiring a separate wooden hoop.

Step 7: Shape and Dry the Basket

  1. Set the basket on a flat surface.
  2. Check the base for rocking and press it gently into shape while the willow is damp.
  3. Adjust the stakes so their spacing looks even from all sides.
  4. Leave the basket undisturbed in a well-ventilated place until it is fully dry.

As the willow dries, it will stiffen and hold the shape you created. Avoid loading the basket heavily before the material has dried.

Fix Common Wicker Basket Problems

Small corrections are easiest while the willow is still damp. If a problem affects several rows, unweave back to the first loose or uneven row rather than trying to hide it at the rim.

Problem Likely Cause Practical Fix
Willow cracks while bending The rod is too dry or not suitable for basketry Re-soak the rod and use it only when it passes the bend test
Gaps appear between woven rows The weavers were not pulled snugly or rows were not pressed down Compress the rows with your fingers and retighten the weave before continuing
Base cups upward instead of lying flat Uneven tension or unevenly spaced spokes Flatten and adjust the base while damp; reweave severely distorted rows
Basket sides lean inward or flare out Stakes are changing angle as you weave Pause, reposition the stakes, and continue with even tension
Rim looks bulky or uneven Tucked ends are concentrated in one area Spread the tucked ends around the rim and trim them neatly
A weaver ends too abruptly New willow was not blended into the weave Overlap the old and new rods within the woven rows and tuck the ends inside

Finish, Line, or Decorate a Wicker Basket

A plain willow basket is beautiful on its own, but you can add color or a liner after it has dried.

Add a Simple Fabric Liner

For a removable liner, place a lightweight fabric square or rectangle inside the basket and press it gently into the base. Fold the fabric over the rim, then secure it with a few removable hand stitches through gaps in the wicker or with ties threaded around the rim.

Use a liner when you want to hold small items that could slip through the weave, such as embroidery floss, scissors, or small sewing notions. Remove the liner for washing rather than washing the willow basket itself.

Add Decorative Details

Wrap raffia, embroidery floss, ribbon, or narrow fabric strips around one or two woven rows for color. Keep decorative wrapping loose enough that it does not pull the stakes inward or distort the basket shape.

You can also tie a bow at the rim, add a stitched fabric label, or use the basket to hold a small piece of embroidery.

Repair and Care for a Willow Basket

Dust the basket with a soft brush and store it somewhere dry. Avoid leaving it in standing water or using it as a container for damp items, since repeated wetting can loosen the weave and encourage warping.

For one broken horizontal weaver:

  1. Trim away only the damaged loose section.
  2. Choose a flexible replacement rod of similar thickness.
  3. Thread it through the basket following the same over-under path as the original weaver.
  4. Tuck both ends into existing woven rows with a bodkin.
  5. Press the repaired row snugly into place and trim exposed ends neatly.
  6. Let the repair dry fully before using the basket.

A broken upright stake needs a more thorough repair. Unweave the rim and the rows crossing the damaged stake, slide a replacement stake down into the base beside the broken section, reweave the opened rows, remake the cut-and-tuck rim, and allow the basket to dry before loading it.

How to Check Your Finished Wicker Basket

Before putting the basket to use, check these details:

  • The base sits flat without rocking.
  • The woven rows are compact, with no large gaps.
  • The side stakes are spaced evenly.
  • The basket holds its intended shape without the center weight.
  • The rim feels smooth, with no sharp or loose ends.
  • The willow is completely dry.

A small finished basket is an excellent place to learn tension, spacing, and rim work. Once you can make a flat base and even side wall, you can scale up the same structure for storage baskets, project baskets, and decorative bowls.

Frequently Asked Questions

Can I weave a wicker Moses bassinet?

No. This willow basket method is for decorative or light household use, not for creating an infant sleep product. Use only a bassinet designed and sold for that purpose with its maker’s instructions.

Can I make the basket taller or wider?

Yes. Make the base wider before raising the stakes if you want a broader basket, and start with longer side stakes if you want more height. Keep the same close, even twining pattern so the larger basket remains firm.

Can I use raffia or fabric strips instead of willow?

Yes, but the result will be softer and less structured than a willow basket. Raffia and fabric work especially well for shallow bowls, wall baskets, and decorative containers. For your first self-supporting basket, use willow and begin with a small round base.