How to Attach a Pom-Pom to a Knitted Hat
Attach a pom-pom to a knitted hat by sewing its long tie tails through the crown, catching the pom-pom’s center binding, and securing the ends on the inside of the hat. This gives the pom-pom a stable anchor instead of relying on loose surface strands. The same basic method works for homemade yarn pom-poms, store-bought yarn pom-poms, and faux-fur pom-poms with sewn-on ties.
How Pom-Pom Attachments Work
A pom-pom needs to be anchored at the very top of the hat, where the crown is closed or gathered. The strongest connection runs from the hat’s inside, through structural knit stitches at the crown, through the pom-pom’s center, and back to the inside.
The center binding is the yarn tied tightly around the middle of a yarn pom-pom before its loops are cut. It holds all the individual strands together. Sewing through that binding yarn matters: surface strands can pull free, while the center binding supports the entire pom-pom.
A two-sided attachment helps the pom-pom stay upright.
Avoid tying a pom-pom only around one loose knit loop or sewing through its fluffy outer yarn. Those shortcuts often let the pom-pom tilt, spin, or gradually loosen.
How to Securely Sew a Pom-Pom to a Knitted Hat
Choose the attachment approach that matches your pom-pom before you begin.
| Pom-Pom Type | Best Attachment | What You Need |
|---|---|---|
| Yarn pom-pom with long tie tails | Sew the tails through the crown and pom-pom core | Yarn needle and matching yarn tails |
| Yarn pom-pom with trimmed or missing tails | Add a new tie strand around the center binding, then sew it on | Matching yarn and yarn needle |
| Faux-fur pom-pom with elastic loop | Use a button inside the crown | Flat button, needle, and thread or yarn |
| Faux-fur pom-pom with fabric ties | Sew or tie the base ties through the crown | Needle and matching yarn or thread |
Step 1: Find the Center of the Hat and Prepare the Tails
- Turn the hat inside out and find the center of the crown. On a gathered hat, this is the point where the finishing yarn pulls the top closed.
- Turn the hat right side out again and hold the pom-pom on the crown to check its placement.
- Make sure the pom-pom has two usable attachment tails. They should come from the center binding, not from the outer fringe.
- If the tails are too short or were cut off, slide a matching yarn strand beneath the pom-pom’s center binding and knot it securely around the core. Leave both ends long enough to pass through the hat and weave in on the inside.
Do not trim the attachment tails until the pom-pom is fully secured.
Step 2: Anchor the First Tail From the Hat’s Inside
- Thread one pom-pom tail onto a yarn needle.
- Start on the inside of the crown. Catch a sturdy knit stitch near the crown center rather than pushing the needle between loose loops.
- Pull the yarn through that stitch to create an interior anchor.
- Bring the needle up through the crown to the right side of the hat, directly beneath where the pom-pom will sit.
Starting from the inside keeps the tie-off concealed and gives the yarn a structural stitch to grip.
Step 3: Sew Through the Pom-Pom’s Center Binding
Hold the pom-pom in position while the needle is on the right side of the hat. Pass the needle through the yarn that binds the pom-pom together at its center, then take a small stitch around that binding before bringing the needle back through the hat.
For The Last Stitch’s Brisa Beanie and Ullvi Knit Hat patterns, pass the attachment tail from the right side through the pom-pom’s center binding, then stitch around the pom-pom’s core.
Repeat this path with the second tail:
- Bring the second tail from the hat’s inside to the right side near the first entry point.
- Pass it through the center binding from a slightly different angle.
- Return it through the crown to the hat’s inside.
Using two anchored tails helps stop the pom-pom from rotating or leaning to one side.
Step 4: Secure the Ends on the Reverse Side
With both tails on the inside of the hat, pull them fairly tight so the pom-pom sits close to the crown without puckering the knitting. It should feel firm when you gently move it from side to side.
Tie each tail around a structural stitch on the inside of the crown, then weave the remaining yarn through several nearby stitches before trimming the ends.
Turn the hat right side out and check the result:
- The pom-pom should sit centered over the crown.
- The crown should not be pulled into a deep dimple.
- The pom-pom should not flip forward when the hat is moved.
- No attachment tails should show on the outside.
Make a Yarn Pom-Pom With Attachment Tails
If you are making a pom-pom from yarn, build the attachment into it before trimming the yarn fringe. This is much easier than trying to add support after the pom-pom is finished.
- Cut a 10-inch length of yarn and set it aside as the center tie and attachment tails.
- Wrap yarn around a pom-pom maker, cardboard template, or several fingers until the bundle is full enough for the look you want.
- Slide the 10-inch tie strand around the middle of the wrapped bundle, between the template pieces or beneath the wrapped yarn.
- Pull the tie tightly and knot it securely around the bundle’s center.
- Cut the loops of wrapped yarn to form the pom-pom fringe.
- Fluff the pom-pom, trim uneven strands, and keep the two center tie tails separate from the fringe.
If you accidentally cut one tail short, add a fresh strand around the center binding before attaching the pom-pom to the hat.
Attach a Removable Faux-Fur Pom-Pom
A removable pom-pom is useful when you want to wash the hat separately, change pom-poms, or store the hat without crushing the fur. Many faux-fur pom-poms have an elastic loop or fabric ties at the base.
Pom-Pom With an Elastic Loop
- Choose a flat button that the elastic loop can stretch over without slipping off easily.
- Turn the hat inside out and sew the button at the center of the crown. Stitch through sturdy crown stitches and through the buttonholes several times.
- Knot the sewing yarn or thread on the inside and weave in the ends.
- Turn the hat right side out. Push the pom-pom’s elastic loop through a knit gap at the crown and into the hat’s interior.
- Stretch the loop over the button.
The button remains hidden inside the hat, while the pom-pom stays centered outside. To remove it, unhook the elastic loop from the button.
Pom-Pom With Fabric or Yarn Ties
Bring each tie through neighboring knit gaps at the crown so they reach the inside of the hat. Tie them around sturdy interior crown stitches, then weave the ends into the inside of the hat.
For a permanent attachment, sew the ties through the pom-pom’s base as well as through the hat’s crown. This prevents the pom-pom base from twisting even if the ties shift slightly.
Fix a Loose, Crooked, or Floppy Pom-Pom
| Problem | Likely Cause | Fix |
|---|---|---|
| Pom-pom flips or spins | Tails were sewn through fringe instead of the center binding | Reattach through the center binding and anchor both tails on the inside |
| Pom-pom hangs off-center | Attachment entered the hat away from the crown center | Unweave the interior tails and reposition them through the crown center |
| Crown puckers | Tails were pulled too tight | Loosen the interior tie slightly, smooth the crown, and secure again |
| Yarn strands are coming out | The pom-pom’s center tie is loose | Add a new strand tightly around the pom-pom core, then use its ends as attachment tails |
| Faux-fur pom-pom droops | The loop or ties are not centered over the crown | Move the button or ties so they align with the crown center |
If the pom-pom is only slightly crooked, do not pull on the fluffy outside to straighten it. Turn the hat inside out, hold the pom-pom in place from the outside, and adjust the tension of the interior tails instead.
Check the Attachment and Help It Last
Check the Pom-Pom Before Wearing
Hold the hat by the crown from the inside and gently move the pom-pom side to side. The pom-pom should stay centered while the knitted fabric remains smooth.
Check that the attachment is secure if:
- The hat has been stretched over a head several times.
- The pom-pom catches on a coat hood, scarf, or bag.
- The hat has been washed or stored for a season.
- You notice the pom-pom beginning to lean.
Never use the pom-pom as a handle for carrying or pulling off the hat. Lift the hat by the brim or body instead.
Wash and Store the Hat Carefully
A removable faux-fur pom-pom can be taken off before washing the hat. For a permanently sewn yarn pom-pom, reshape the pom-pom with your fingers after the hat is dry and trim only clearly uneven fringe.
Store the hat with the pom-pom facing upward rather than compressed under heavier items. If the pom-pom looks flattened, roll it gently between your palms and separate the yarn strands with your fingers.
Frequently Asked Questions
How Do I Keep a Pompom on a Hat?
Keep a pom-pom on a hat by sewing through its center binding yarn instead of its outer fringe. Run both attachment tails through structural crown stitches, return them to the hat’s inside, tie them securely, and weave in the ends. A two-tail attachment resists spinning better than a single tie.
How Do I Knit a Pom-Pom Onto a Hat Pattern?
A fluffy yarn pom-pom is usually attached after the hat is finished rather than knitted directly into the fabric. Complete the crown, make or prepare the pom-pom with long center tails, and sew those tails through the crown from the inside. A knitted bobble is different: it is worked as part of the knitting and does not create a separate pom-pom.
How Do I Attach a Fur Pom-Pom to a Crochet Hat?
Attach a faux-fur pom-pom to a crochet hat by bringing its elastic loop or ties through a stitch opening at the center of the crown. Fasten an elastic loop around a button sewn inside the crown, or tie sewn-on ties around sturdy interior crochet stitches. The button method makes the pom-pom removable.
How Do I Make a Pom-Pom for a Hat?
Cut a 10-inch yarn strand before cutting the pom-pom loops, then use that strand to tie the wrapped bundle tightly at its center. After cutting and trimming the fringe, leave the two ends of that center tie uncut. Those tails become the attachment yarn for sewing the pom-pom to the hat.
Can I Attach a Pom-Pom With Glue?
Glue is not a reliable main attachment for a knitted hat because the fabric stretches and the pom-pom needs support at its core. Sew a yarn pom-pom through its center binding, or use a button-and-loop fastening for a removable faux-fur pom-pom. Once the pom-pom stays centered and the crown lies smooth, the hat is ready to wear.
