How to Sew Hexagons Together

To sew fabric hexagons together, place them right sides together and whipstitch their folded edges by hand, or machine-sew raw-edge hexagons between marked seam intersections. Paper piecing uses paper templates to shape the fabric before sewing. This guide covers both methods, including how to handle corners, join larger sections, and get patchwork that lies flat.

Choose Your Hexagon Piecing Method

Choose your joining method before cutting: paper-pieced hexagons and machine-pieced hexagons need different preparation.

English paper piecing, usually shortened to EPP, uses paper forms to shape fabric before hand sewing, a technique taught by Cobb County Public Library. The paper represents the finished shape, and the fabric extending beyond it folds to the back.

Machine piecing uses fabric shapes with seam allowances included. Their raw edges line up for sewing, but the stitching stops short of the points so adjoining pieces can fit around the corners.

Choose the method that matches your pieces:

What You Have or Want Best Method Edges You Sew Together
Fabric wrapped and basted around paper hexagons Hand-sewn English paper piecing Folded fabric edges, with papers still inside
Raw fabric hexagons cut from a machine-piecing pattern Machine piecing Raw edges, stitching between marked seam intersections
A hand-sewing project made from fabric scraps English paper piecing Fabric prepared around matching paper templates
A whole-hexagon quilt assembled at the sewing machine Machine piecing with Y-seams Pattern-cut pieces with accurately marked corners

How to Sew Hexagons Together by Hand

Hand-sewn English paper piecing takes you from loose fabric and paper templates to a joined patchwork panel. If your hexagons are already basted, leave the papers in place while joining them.

Step 1: Prepare and Baste the Hexagons

Gather fabric, matching paper hexagon templates, a fine hand-sewing needle, sewing thread, scissors, and either basting thread or a fabric glue pen. Use ordinary sewing thread rather than embroidery floss for the joining seams; floss adds unnecessary bulk.

  1. Check the templates. Edges that will meet must be the same length. Use identical templates for a regular hexagon patchwork.
  2. Cut the fabric larger than the paper. Leave enough fabric around every edge to fold over the paper and stay securely on the back. The paper, not the fabric’s raw edge, determines the finished shape.
  3. Center the paper on the fabric’s wrong side. Fold the fabric snugly over each paper edge without bending the template.
  4. Baste the folds in place. For thread basting, stitch through the fabric and paper to hold the folds. Alternatively, use a fabric glue pen within the seam allowance, keeping adhesive away from the folded edge where the joining needle will pass.
  5. Check the corners. They should be crisp, with no loose fabric bulging beyond the paper’s outline.

Step 2: Arrange the Hexagons and Match the First Edge

  1. Lay the hexagons face up in their intended arrangement. A photo can help you keep track of colors as the patchwork grows.
  2. Pick up a neighboring pair and place them right sides together, with their paper-backed sides facing outward.
  3. Match the entire shared edge, including both corners.
  4. Hold the pair between your fingers or use a sewing clip away from the area you are stitching.

Do not stretch one edge to fit another. If the corners cannot line up, check whether a paper has shifted or the templates differ in size.

Step 3: Whipstitch the Shared Edge

A whipstitch wraps around the aligned folded edges, joining them without sewing through the papers.

  1. Thread the needle and knot the end. Anchor the thread in the fabric seam allowance near the starting corner, keeping the knot on the back.
  2. Take a stitch through the folded fabric at both matching corners.
  3. Pass the needle through a few fabric threads at each fold. Bring it around the joined edge and repeat from the same side.
  4. Continue along the edge with close, even stitches. Catch the fabric folds without driving the needle through the paper or far into the visible face of either hexagon.
  5. Pull each stitch just snug enough to bring the edges together. Tight pulling can pucker the seam or make the thread more noticeable from the front.
  6. At the far corner, secure the thread with a stitch through the seam allowance, passing the needle through the thread loop before tightening it. Bury the tail within the folded allowance and trim.

Open the pair gently and inspect the front. The edges should meet cleanly, with little thread showing.

Step 4: Add Hexagons and Sew the Corner Joins

  1. Return the joined pair to the layout and identify the next touching edge.
  2. Place the next hexagon right sides together with its neighbor, aligning the corners before stitching.
  3. Fold previously joined pieces out of the way so only the intended pair of edges is held together. Flex the paper gently if needed; do not crush the corner you are trying to match.
  4. Whipstitch the shared edge and secure the thread at the end.
  5. Sew every other edge that the new hexagon shares with the existing patchwork.

Sewing every shared edge is easy to overlook. A hexagon may attach along one edge at first, then need additional seams where it touches other pieces.

At a junction, bring the first stitch right to the meeting corners. Do not leave an unsewn gap, but do not pull the corners into a tight lump either. Open the work after each tricky join to check that it still lies flat.

Step 5: Remove the Papers and Press

  1. Keep papers in any hexagons that still need neighboring pieces attached.
  2. When the planned panel is fully joined, press it to set the folds, using a heat setting suitable for the fabric and any basting adhesive.
  3. Remove the temporary basting stitches or gently release the glued folds. Ease out the papers without pulling on the joining stitches.
  4. Press the panel flat, lifting and lowering the iron rather than sliding it across the patchwork.

If the panel will be appliquéd, preserve its turned-under outer edges. The joined panel is now ready for attachment to a background or incorporation into a quilt.

How to Sew Whole Hexagons by Machine

For whole-hexagon machine piecing, the essential difference is at the corners: the seam allowances must remain free so the adjoining pieces can open out into a flat surface. Sewing all the way to the raw points traps those allowances and makes the junction pucker.

A Y-seam is a junction where three seams meet. Sew each adjoining edge separately rather than trying to force a continuous straight seam through the junction.

Step 1: Cut and Trim the Fabric Hexagons

If your pattern supplies a cutting template, use it. For a rectangle-cut machine-piecing example, start with 5.25 × 6-inch pieces cut from 18 × 21-inch fat quarters. These are project-specific dimensions, not a universal hexagon size; confirm the required dimensions in your project’s cutting instructions or pattern.

To trim this rectangle-based shape:

  1. Bring the long raw edges together so the fold runs along the rectangle’s longest dimension.
  2. Place the acrylic ruler’s 60-degree line on the fold.
  3. Position the ruler’s cutting edge at an end of the fold, angling the cut inward toward the center of the fabric’s long raw edges.
  4. Cut off the triangular section through both fabric layers.
  5. Repeat at the other end, then unfold the fabric.

Use a rotary cutter on a cutting mat, keeping your fingers clear of the cutting edge.

This produces the near-regular hexagons used in this rectangle-based example. Do not assume they will match an unrelated regular-hexagon template.

Step 2: Make a Corner-Marking Template

  1. Trace a cut fabric hexagon onto template plastic and cut out the matching shape.
  2. Draw 1/4-inch seam lines inside the outline.
  3. Mark where adjacent seam lines intersect. These intersections, not the raw fabric points, are the stitching corners.
  4. Make holes at the intersections you need to transfer.
  5. Place the template on the wrong side of each fabric piece and mark through the holes with a removable fabric marker or fabric marking pencil.

The column-piecing setup uses four corner marks for its initial seams. Mark any remaining seam intersections that will be used when connecting the columns, too.

Drawing the inset seam lines first establishes the correct stopping place.

Do not substitute masking tape on the machine bed for these corner marks. Tape can help guide a seam’s width, but it does not reliably identify where an angled seam must start and stop.

Step 3: Sew Pairs Into Columns

A 1/4-inch presser foot with a guide helps maintain the seam allowance. The attachment varies by machine, so choose one listed among your sewing machine’s compatible presser-foot accessories.

  1. Lay out the entire design and identify the pieces belonging to each column.
  2. Place a pair right sides together, aligning their raw edges and matching their marked seam intersections.
  3. Lower the presser foot and insert the needle exactly at the starting mark.
  4. Sew forward, then backstitch to the starting mark without crossing beyond it.
  5. Continue to the ending mark and backstitch within the sewn seam. Leave the fabric between the mark and the raw point unsewn.
  6. Add the next piece in the column in the same way.

Check the arrangement as each column grows. Leave the corner allowances loose, and postpone final pressing until the columns are joined.

Step 4: Join the Columns and Finish the Panel

  1. Place neighboring columns together and match the first shared edge.
  2. Align both seam-intersection marks, then move previously sewn seam allowances away from the needle’s path.
  3. Stitch between the marks, securing both ends without crossing into the free allowances.
  4. Reposition the fabric for the next shared edge. Treat each edge as a separate seam rather than sewing across the junction.
  5. Continue along the columns, opening the work periodically to check for trapped fabric.

At each join, keep only the two fabric layers being joined under the needle. Sweep previous seam allowances aside rather than stitching through them.

When all columns are connected, inspect the junctions from both sides. Unpick and resew any section that catches an allowance or extends beyond its intersection. Clip loose threads, arrange the seam allowances so the junctions lie comfortably, and press the completed panel flat.

Check the Hexagon Seams and Fix Problems

Open the patchwork fully and place it on a flat surface. A problem at one junction is easier to correct before more pieces surround it.

Use the visible symptom to choose the smallest useful correction:

What You See Likely Cause What to Do
Hand stitches are conspicuous on the front Stitches catch too much fabric, or the thread contrasts strongly Unpick the affected section and resew with shallower bites at the folds and better-matching thread; secure the new seam
A hand-sewn corner has a hole Stitching stops before the folded corners meet Add a securing stitch through the matching corner folds, then fasten and bury the thread
A machine-sewn junction puckers Stitching extends beyond the intersection or catches another allowance Unpick the affected junction, free the allowance, and resew between the marks before pressing
One edge seems longer than its neighbor A paper has shifted, shapes differ, or fabric has stretched Check the pieces against their templates and correct any mismatch before sewing.
The panel cups instead of lying flat Tight hand stitches, distorted edges, or trapped machine allowances Inspect the tightest junction first and release the faulty stitches; realign, resew, and press without stretching

Before moving on, confirm that:

  • Shared edges meet without visible gaps.
  • Corners meet without holes or hard puckered knots.
  • The panel lies flat without being pulled into shape.
  • Joining threads are secured.
  • Temporary papers and basting have been removed from the completed unit.
  • No machine-sewn junction traps an allowance that needs to move freely.

Once those checks pass, use the panel as an appliqué motif or prepare it for the next stage of your quilt project.

Frequently Asked Questions

How Do You Join Hexagon Flower Quilt Rows Together?

Join hexagon flower rows along their matching exposed edges, working through the zigzag boundary one edge at a time. Lay out the flowers and any background hexagons first, because the spacing determines which edges actually meet. For paper-pieced flowers, keep the boundary papers in place while whipstitching; secure the threads, remove the papers after assembly, and press the joined rows flat.

How Do You Connect Hexagon Blocks Together?

Hexagon motifs already appliquéd onto square fabric backgrounds connect along the backgrounds’ straight edges, using the seam allowance specified by the quilt pattern. Blocks made entirely from hexagons connect along their exposed hexagon edges instead. Depending on the layout, background hexagons may fill the spaces between flower blocks rather than the flowers touching directly.

How Do You Make a Hexagon Paper Template Step by Step?

To draw a regular hexagon template, draw a circle with a compass, then keep the compass opening unchanged and step that distance around the circumference to mark its six corners. Connect neighboring marks with a ruler and cut along the straight outline. For English paper piecing, this paper is the finished-size shape; the fabric must extend beyond it so the edges can fold to the back.